4 HP BIOS
Symbios Logic SCSI Configuration Utility
Symbios Logic SCSI Configuration Utility
The Symbios Logic SCSI Configuration Utility lets you view and change the default configuration for the host adapter and all SCSI devices connected to it, or for individual SCSI devices. If, while using this utility, you accidentally
disable all the controllers, pressing 
during the
Default Settings You Can Change
The following two tables show the configuration settings that can be changed. The first table shows the global settings which impact the host adapter and all SCSI devices connected to it. The second table shows the device settings which apply to individual devices.
Settings for the Host Adapter and All Devices | Default Settings |
|
|
SCAM Support | On |
|
|
Parity Checking | Enabled |
|
|
Host Adapter SCSI ID | 7 |
|
|
Scan Order | Low to High |
|
|
Settings for Individual SCSI Devices | Default Settings |
|
|
Synchronous Transfer Rate (MB/sec) | 40 |
|
|
Data Width | 16 |
|
|
Disconnect | On |
|
|
Read Write I/O Timeout (secs) | 10 |
|
|
Scan for Devices at Boot Time | Yes |
|
|
Scan for SCSI LUNs | Yes |
|
|
Queue Tags | Enabled |
|
|
77