HP Ultrium tape drive Ultrium 230i manual If your server is in its original configuration no

Is the correct SCSI host bus adapter installed?

Description	Further information
The server already has a SCSI host bus	If your server is in its original configuration (no
adapter but it is difficult to determine	SCSI adapters have been added or removed) then
what type it is.	use www.hp.com/go/connect to check the
	compatibility of your system. You can also check
	the SCSI configuration from the boot-up screen or
	from the Windows Control Panel, or by using HP
	Library & Tape Tools (see page 33).
The server may not have a SCSI host bus	Use HP Library & Tape Tools (see page 33) to
adapter installed.	check whether you have a SCSI host adapter on
	your system. If not, you will need to purchase one.

Do drivers need to be installed and, if so, which ones

Description	Further information
It is unclear whether there is a need to	Detailed information specific to your system can be
install drivers onto the system and more	found on the www.hp.com/go/connect web
help is required.	site.
	For support on Windows operating systems,
	drivers can be obtained from the
	HP StorageWorks Tape CD-ROM or from
	www.hp.com/support/ultrium. For support
	on UNIX systems, see the UNIX Configuration
	section in the online User’s Guide on the
	HP StorageWorks Tape CD-ROM.
	(Backup software that states support for
	HP StorageWorks Ultrium tape drives also provides
	the required drivers.)
The required drivers do not appear to be	Future drivers will be provided via the support web
available.	site when they become available.

39