York DJ150 installation manual Turns Open ESP‡ CFM BHP

Page 29

Blower performance for gas heat includes maximum number of heat tubes available for each tonnage.

Blower performance for gas heat includes maximum number of heat tubes available for each tonnage.

035-19046-002-B-0104

TABLE 15: DJ150, 12-1/2 TON STANDARD MOTOR DOWN SHOT BLOWER PERFORMANCE* †

									TURNS OPEN**
ESP‡		0			1			2					3			4			5
	CFM	W††	BHP	CFM	W††	BHP	CFM	W††		BHP	CFM		W††	BHP	CFM	W††	BHP	CFM	W††	BHP
0.4	5078	3630	3.89	4809	3103	3.33	4594	3053		3.27	4360		2478	2.66	4090	2093	2.24	3812	1798	1.93

0.6	4865	3456	3.71	4584	2961	3.17	4349	2912		3.12	4106		2318	2.49	3814	1964	2.11	-	-	-

0.8	4642	3284	3.52	4356	2828	3.03	4089	2776		2.98	3840		2137	2.29	-	-	-	-	-	-

1.0	4408	3114	3.34	4124	2705	2.90	3815	2647		2.84	-		-	-	-	-	-	-	-	-

1.2	4164	2947	3.16	3889	2592	2.78	-	-		-	-		-	-	-	-	-	-	-	-

1.4	3910	2787	2.99	-	-	-	-	-		-	-		-	-	-	-	-	-	-	-

*.

†.Blower performance includes two-inch throwaway filters.

‡.ESP (External Static Pressure) given is that available for the supply and return air duct system. All internal resistances have been deducted from the total static pressure of the blower.

**. “Turns Open” refers to the setting of the variable pitch motor sheave, where “0 Turns Open” is fully closed.

††.W = Watts

TABLE 16: DJ150, 12-1/2 TON OPTIONAL MOTOR DOWN SHOT BLOWER PERFORMANCE* †

									TURNS OPEN**
ESP‡		0			1			2					3			4			5
	CFM	W††	BHP	CFM	W††	BHP	CFM	W††		BHP	CFM		W††	BHP	CFM	W††	BHP	CFM	W††	BHP
0.4	5994	5400	5.79	5565	4369	4.69	5488	4169		4.47	5264		3599	3.86	4990	3085	3.31	4738	2812	3.02

0.6	5824	5216	5.59	5368	4186	4.49	5289	3991		4.28	5049		3437	3.69	4763	2937	3.15	4491	2655	2.85

0.8	5641	5022	5.39	5170	4012	4.30	5076	3807		4.08	4822		3272	3.51	4528	2790	2.99	4235	2497	2.68

1.0	5444	4819	5.17	4971	3846	4.12	4847	3618		3.88	4584		3103	3.33	4286	2644	2.83	3969	2340	2.51

1.2	5233	4609	4.94	4771	3687	3.95	4604	3426		3.67	4335		2933	3.15	4035	2499	2.68	-	-	-

1.4	5009	4394	4.71	4571	3537	3.79	4346	3233		3.47	4074		2762	2.96	3777	2356	2.53	-	-	-

1.6	4771	4174	4.48	4370	3395	3.64	4074	3040		3.26	3802		2590	2.78	-	-	-	-	-	-

1.8	4520	3951	4.24	4169	3262	3.50	3786	2850		3.06	-		-	-	-	-	-	-	-	-

2.0	4255	3728	4.00	3966	3137	3.36	-	-		-	-		-	-	-	-	-	-	-	-

2.2	3976	3505	3.76	3763	3020	3.24	-	-		-	-		-	-	-	-	-	-	-	-

*.

†.Blower performance includes two-inch throwaway filters.

‡.ESP (External Static Pressure) given is that available for the supply and return air duct system. All internal resistances have been deducted from the total static pressure of the blower.

**. “Turns Open” refers to the setting of the variable pitch motor sheave, where “0 Turns Open” is fully closed.

††.W = Watts

Unitary Products Group

29

Image 29

Contents Installation Manual Table of Contents List of Tables List of FiguresInspection Safety ConsiderationsGeneral Renewal Parts ReferenceApprovals Nomenclature 12½ Ton Predator Model Number Nomenclature 150 N15NOMENCLATURE, Additional Options Preceding Installation InstallationInstallation Safety Information Limitations Compressor SectionPREDATOR Magnum Component Location Unit Voltage Limitations Unit Temperature LimitationsRigging and Handling LocationClearances Unit WeightsPoint Load Weight Detail C Unit DimensionsBottom Duct Openings from Above Duct Covers Rear Duct Dimensions DuctworkPREDATOR Magnum Roof Curb Dimensions Control Wire Sizes Thermostat WiringPower and Control Wiring FiltersElectronic Thermostat Field Wiring Power Wiring DetailField Wiring 24 Volt Thermostat Contactor 1M Factory or Field Ground MCA Minimum Supply AIR CFM Physical DataOptional Electric Heat GAS Piping Optional GAS HeatGAS Heat Application Data LP UNITS, Tanks and Piping GAS ConnectionFactory Installed Options Field Installed Accessories Indoor AIR Quality AQ Minimum Position AdjustmentEnthalpy SET Point Adjustment Enthalpy SET Point Chart Blower Rotation PhasingSupply AIR Limitations Belt TensionTurns Open ESP‡ CFM BHP Blower performance includes dry coil and two-inch AIR Balance Indoor Blower SpecificationsChecking AIR Quantity Method ONEDRY Coil Delta P Supply AIR Drive Adjustment Additional Static Resistance OperationMotor Sheave Datum Diameters Cooling Sequence of OperationCooling Operation Errors Economizer Single or Dual with Power ExhaustHIGH-PRESSURE Limit Switch No Outdoor AIR OptionsCompressor Protection Safety ControlsElectric Heat Limit Setting Electric Heating Operation ErrorsElectric Heating Sequence of Operations Electric Heat Anticipator SetpointsIgnition Control Board GAS Heating Operation ErrorsGAS Heating Sequence of Operations GAS Heat Limit Control Settings START-UP GAS Heat START-UP CoolingManifold GAS Pressure Adjustment Post Start ChecklistShut Down Checking GAS InputGAS Rate Cubic Feet PER Hour BURNERS/ORIFICES INSPECTION/SERVICING Adjustment of Temperature RiseCharging the Unit TroubleshootingPREDATOR Magnum Flash Codes Unit Control Board Flash CodesBasic Troubleshooting Flowchart Trip Failure Flow Chart Cooling Troubleshooting Guide Unitary Products Group 035-19046-002-B-0104 GAS Heat Troubleshooting Guide Unitary Products Group 035-19046-002-B-0104 Unitary Products Group Unitary 5005 Norman Products York Group Drive 73069

DJ150 specifications

The York DJ150 is a standout model in the world of portable DJ equipment, designed to cater to both budding DJs and seasoned professionals. Its sleek and compact form factor makes it highly portable, allowing for easy transporting to gigs, parties, or personal events.

One of the main features of the DJ150 is its user-friendly interface, which includes a simplified control layout. This design boils down essential functions into accessible buttons and knobs, enabling DJs to focus on their mixes without distractions. The large jog wheels are not only responsive but also provide precision when scratching and cueing tracks, making it a joy to use for both live performances and practice sessions.

In terms of sound quality, the York DJ150 is equipped with high-performance audio circuitry. It ensures that sound clarity is maintained, with a dynamic range that captures the intricacies of music. The device supports multiple audio formats, offering versatility for DJs that work with various types of digital music files.

The DJ150 integrates advanced technologies that facilitate seamless mixing and creative expression. With features such as built-in sound effects, loops, and samples, DJs can add their personal touch to sets. Additionally, the model includes an intelligent beat matching function which automatically syncs the tempo of different tracks, allowing for smooth transitions and uninterrupted flow.

Connectivity is another strong point for the York DJ150. It offers multiple input and output options, including USB ports for quick connections to a laptop or external devices, line inputs for instruments or microphones, and headphones output for monitoring. This ensures that users can connect a wide range of equipment while maintaining a clean setup.

Durability plays a key role in the DJ150's design, as it is built to withstand the rigors of frequent use. Its robust construction and quality materials contribute to its longevity, appealing to those who value reliable gear.

In conclusion, the York DJ150 represents a versatile solution for DJs seeking a blend of portability, functionality, and sound quality. Its comprehensive features and professional-grade technologies position it as a strong contender in the DJ equipment market, making it suitable for performances of all levels. Whether you are a novice starting your DJ journey or a seasoned pro looking for an efficient tool, the DJ150 ticks all the boxes.