HP 2100 ER manual Mounting the Fibre Bridge in a Rack, Assembly Components

NOTE

Table 2-1

Setting Up the Fibre Bridge

Mounting the Fibre Bridge in a Rack

Mounting the Fibre Bridge in a Rack

Mounting the Fibre Bridge in a rack requires assembling L-brackets to
the Fibre Bridge and then mounting the L-brackets to a rack. L-brackets
allow the Fibre Bridge to be mounted in a fixed position, near the back of
a rack.			SettingUpthe FibreBridge
Before you begin, verify you have the assembly components listed in
All connections and user displays are located on the back of the Fibre
Bridge. Consequently, mount toward the back of a rack.
Table 2-1.
Assembly Components
Tool	1	#2 Phillips screwdriver (not supplied).
Mounting	1 pair	L-brackets, for assembly with Fibre
brackets		Bridge.
Rackmount	1 package	Six (6) 6x32 screws to attach Fibre Bridge
screws and	(Includes	to L-brackets.
nuts	extra	Six (6) 10x32 screws and six (6) clip nuts
	parts)
		for installing the Fibre Bridge (with
		L-brackets attached) into a rack.
Filler panel	1	Decal for filler panel, provided by
decal		customer (supplied separately by rack
		manufacturer).

Chapter 2 2-3