HP 2100 ER manual Fibre Bridge Default Configuration Settings, Scsi

Operating the Fibre Bridge

Changing the Default Settings

Table 3-1	Fibre Bridge Default Configuration Settings
	Serial Port	•	Baud rates: 9600, 19200, 38400, 57600, 115200
			(baud rate will auto-configure).
		•	No handshake.
		•	No parity.
		•	8 data bits.
		•	1 stop bit.
	Fibre	•	Hard address mode uses address 0x82.
	Channel	• User may change both address mode and hard
			address.
	SCSI	Initiator address 7.
		Bus automatically negotiates for wide ultra SCSI
		performance, per ANSI SCSI specifications.
		Only the initiator addresses may be changed.
		Each bus can be set to its own initiator address
		independently of the other bus.
	Trace Debug	Level 0, 1, 2, and 3.
	Level

3-8 Chapter 3