Chapter 7
NOTE: You can only send a
To send a fax from memory
1.Load your original
2.Touch Fax, and then touch Settings.
3.Touch Scan and Fax.
4.
Enter the fax number by using the keypad, touch | (Speed Dial) to select a speed dial, or touch |
(Call History) to select a previously dialed or received number.
5.Touch Start Fax.
The printer scans the originals into memory and sends the fax when the receiving fax machine is available.
Schedule a fax to send later
You can schedule a
You can only schedule one fax to be sent at a time. You can continue to send faxes normally, however, while a fax is scheduled.
NOTE: You can only send scheduled faxes in
To schedule a fax from the printer control panel
1.Load your original
2.Touch Fax, and then touch Settings.
3.Touch Send Fax Later.
4.Enter the send time by touching up and down arrows, touch AM or PM, and then touch Done.
5.
Enter the fax number by using the keypad, touch | (Speed Dial) to select a speed dial, or touch |
(Call History) to select a previously dialed or received number.
6.Touch Start Fax.
The printer scans all pages and the scheduled time appears on the display. The fax is sent at the scheduled time.
To cancel a scheduled fax
1.Touch the Fax, then touch Settings.
2.Touch Send Fax Later.
3.Touch Cancel Scheduled Fax.
Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or might even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. The default setting is On. Turn ECM off only if it increases phone charges substantially, and if you can accept poorer quality in exchange for reduced charges.
28 Fax