HP CM1415fn Color manual Fax is received but does not print, Private Receive feature is on

c.Open the Fax Activity Log menu.

d.Select the Print Log Now option.

●If the error persists, contact HP. See www.hp.com/support/CM1410series or the support flyer that came in the product box.

The Fax storage is full. message appears

●Turn the product off then on.

●Print all of the faxes, and then have the sender resend the fax.

●Ask the sender to divide a large fax job into smaller sections, and then fax them individually.

●Make sure that the resolution of the sending fax machine is not set to the Photo setting or the Superfine setting.

a.From the Home screen, touch the Setup button.

b.Open the Fax Setup menu.

c.Open the Advanced Setup menu.

d.Open the Fax Resolution menu.

e.Select the correct setting.

●Cancel all fax jobs or clear the faxes from memory.

The Fax is busy. message appears

●The product cannot receive a fax while attempting to send one. Cancel the fax send and try sending at a later time.

●Allow the product to try sending the fax again.

A fax is received but does not print

The Private Receive feature is on

●When the Private Receive feature is activated, received faxes are stored in memory. A password is required to print the stored faxes.

●Enter the password to print the fax. If you do not know the password, contact the product administrator.

NOTE: Memory errors might occur if the faxes are not printed. The product will not answer if the memory is full.

ENWW Solve fax problems 231