Note Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP
4.Inspect the print cartridge contacts for ink and debris buildup.
5.Dip a clean foam rubber swab or
6.Hold the print cartridge by its sides.
7.Clean only the
1 Copper-colored contacts
2 Ink nozzles (do not clean)
8.Slide the print cartridge back into the slot. Push the print cartridge forward until it clicks into place.
9.Repeat if necessary for the other print cartridge.
10.Gently close the print cartridge door and plug the power cord into the back of the HP
Maintain the HP All-in-One
User Guide | 33 |