Troubleshooting
Chapter 12
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP
To uninstall from a Windows computer, method 1
1.Disconnect the HP
2.On the Windows taskbar, click Start, Programs or All Programs, HP, Deskjet F2100
3.Follow the onscreen instructions.
4.If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work properly if the files are deleted.
5.Restart your computer.
NOTE: It is important that you disconnect the HP
6.To reinstall the software, insert the HP
7.After the software is installed, connect the HP
8.Press the On button to turn the HP
After connecting and turning on the HP
9.Follow the onscreen instructions.
To uninstall from a Windows computer, method 2
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1.On the Windows taskbar, click Start, Settings, Control Panel.
2.
3.Select HP Deskjet
4.Disconnect the HP
5.Restart your computer.
NOTE: It is important that you disconnect the HP
6.Insert the HP
7.Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP
86 Troubleshooting