products. Put the glass panel back, making sure the smooth part is on the outside and the printed part inside the oven door. Then release the hinges.
Note: do not release the hinges if the glass panel is not fitted on the door.
Cleaning inside the oven:
To make heavy-duty cleaning easier, the door can be removed as follows. After opening the door and blocking the hinges (figure 28), put the door in a semi-open position and pull towards yourselves until it is released. To reassemble, proceed as above in reverse. The side racks can also be removed, by removing the nuts securing them to the oven.
Cast iron or aluminium strip racks:
Soft aluminium-bottomed pans are not recommended, to prevent leaving permanent marks on the rack surface which cannot be removed with normal washing.
Figure 1
