GE AJCM 08 ACD Care and cleaning of the air conditioner, Grille and Case, Outdoor Coils

Page 10

Care and Cleaning Operating Instructions Safety Instructions

Care and cleaning of the air conditioner.

Grille and Case

Turn the air conditioner off and remove the plug

To clean, use water and a mild detergent.

from the wall outlet before cleaning.

Do not use bleach or abrasives.

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly.

If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your GE service outlet.

Front Grille

The front grille can be removed for more thorough

3. Pull the grille out from the bottom and lift up

cleaning and to locate the model and serial

from the tabs on the top of the case.

numbers on the front of the base pan.

 

Consumer Support Troubleshooting Tips Installation Instructions

To remove:

1.Pull the filter out.

2.Remove the two grille screws.

On some models

On some models

Grille

Tab

To replace:

Hook the tabs on the front grille even with the tabs on the case and snap into place.

Replace the screws and filter.

Grille

Tab

10

Image 10
Contents Installation Instructions Model #Before making any repairs or cleaning New power supply cord obtained fromEither the plug or connector end Manufacturer and not repaired. DoGEAppliances.com We strongly recommend against the use of an extension cordWe strongly recommend against the use of an adapter plug Instructions Operating InstructionsConsumer Remote Control Cleaning Operating Instructions Safety InstructionsAbout the controls on the air conditioner-Cool Only Models Remote Control SafetyCooling Descriptions Appearance may vary Consumer Support Remote ControlAbout the controls on the air conditioner-Heat/Cool Models FAN SpeedsTips Consumer Support Heating DescriptionsAbout the controls on the air conditioner Thermostat connections provide 24 V AC only Outdoor Coils Care and cleaning of the air conditionerGrille and Case Front GrilleHow to Insert the Batteries in the Remote Control Safety Air FilterConsumer Support ELECTRICAL REQUIREMENTS Amp time delay fuse or circuit breakerBefore YOU Begin Model Qualifying QuestionsTools YOU MAY Need GE KIT NumbersRemove ALL Shipping Pads Remove Locking Plate on Front Left SideAttach Front Grille Prepare Opening in Wall Support Requirements for AIR ConditionerWindow INSTALLATION-OPTIONAL Window RequirementsRemove AIR Conditioner from Case Install Sill Supports Prepare WindowMEASURE,PANELS CUT and Install Filler Mark the a and B measurements on each sideInstall Case in Window Case should have a 1/8″ minimum tilt toward the outsideInstall Window Gasket and Locking Bracket Replace AIR Conditioner in CaseCleaning Before you call for service…Operating Instructions Safety Instructions Normal Operating Sounds Consumer SupportTroubleshooting Tips Consumer Support Air Conditioner WarrantyCleaning Installation Instructions GE Will ReplaceConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio