GEAppliances.com
To maintain optimum performance, clean the filter at least every 30 days.
Safety
Air Filter |
|
FRONT | FRONT |
Dirty | Clogged |
| reduces cooling, heating |
| and airflow. |
Turn the air conditioner off before cleaning.
The most important thing you can do to maintain the air conditioner is to clean the filter at least every 30 days. A clogged filter reduces cooling, heating and air flow.
Keeping the air filter clean will:
nDecrease cost of operation.
nSave energy.
nPrevent clogged heat exchanger coils.
nReduce the risk of premature component failure.
To clean the air filters:
nVacuum off the heavy soil.
nRun water through the filters.
nDry thoroughly before replacing.
To remove the air filter, on some models:
Carefully pull the tab forward, up and out.
To remove the air filter, on other models:
Pull it down.
To replace the air filter:
Replace the clean filter by pushing it back into place.
NOTICE:Do not operate the air conditioner without the filter in place. If a filter becomes torn or damaged it should be replaced immediately.
Operating without the filter in place or with a damaged filter will allow dirt and dust to reach the indoor coil and reduce the cooling, heating, airflow and efficiency of the unit.
Replacement filters are available from your salesperson, GE dealer, GE Service and Parts Center or authorized Customer Care® servicers.
Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips
How to Insert the Batteries in the Remote Control
1
2
3
Remove the battery cover by sliding it according to the arrow direction.
Insert new batteries making sure that the
(+) and
Reattach the cover by sliding it back into position.
NOTES:
nUse 2 AAA (1.5 volt) batteries. Do not use rechargeable batteries.
nRemove the batteries from the remote control if the system is not going to be used for a long
time.11