GE AJCM 08 ACD Install Window Gasket and Locking Bracket, Replace AIR Conditioner in Case

Page 21

Installation Instructions

INSTALL WINDOW GASKET AND LOCKING BRACKET

ACut the foam top window gasket to the window width.

BStuff the foam between the glass and the window to prevent air and insects from getting into the room.

Attach the window locking bracket with 1 type E screw.

9REPLACE AIR CONDITIONER IN CASE

ACarefully slide the air conditioner back into the case.

BAttach the power cord to the base pan with the clamp.

Base pan

Power cord

Clamp

CReinstall the locking plate with the tab behind the wall case flange. Tighten the screw.

Locking plate

Tighten screw

DReattach the front grille. An opening for the power cord is on the bottom of the front grille.

EFill holes and cracks with caulking provided by the installer.

Image 21

Contents Model # Installation InstructionsEither the plug or connector end New power supply cord obtained fromBefore making any repairs or cleaning Manufacturer and not repaired. DoWe strongly recommend against the use of an adapter plug We strongly recommend against the use of an extension cordGEAppliances.com Instructions Operating InstructionsCleaning Operating Instructions Safety Instructions Consumer Remote ControlAbout the controls on the air conditioner-Cool Only Models Safety Remote ControlCooling Descriptions About the controls on the air conditioner-Heat/Cool Models Consumer Support Remote ControlAppearance may vary FAN SpeedsHeating Descriptions Tips Consumer SupportAbout the controls on the air conditioner Thermostat connections provide 24 V AC only Grille and Case Care and cleaning of the air conditionerOutdoor Coils Front GrilleSafety Air Filter How to Insert the Batteries in the Remote ControlConsumer Support Before YOU Begin Amp time delay fuse or circuit breakerELECTRICAL REQUIREMENTS Model Qualifying QuestionsGE KIT Numbers Tools YOU MAY NeedRemove Locking Plate on Front Left Side Remove ALL Shipping PadsAttach Front Grille Support Requirements for AIR Conditioner Prepare Opening in WallWindow Requirements Window INSTALLATION-OPTIONALRemove AIR Conditioner from Case Prepare Window Install Sill SupportsMark the a and B measurements on each side MEASURE,PANELS CUT and Install FillerCase should have a 1/8″ minimum tilt toward the outside Install Case in WindowReplace AIR Conditioner in Case Install Window Gasket and Locking BracketOperating Instructions Safety Instructions Before you call for service…Cleaning Normal Operating Sounds Consumer SupportCleaning Installation Instructions Air Conditioner WarrantyTroubleshooting Tips Consumer Support GE Will ReplaceParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio