Cleaning Operating Instructions Safety Instructions
About the controls on the air conditioner—Cool Only Models
Appearance may vary.
Air Conditioner Controls | Remote Control |
Lights beside the touch pads on the air conditioner
control panel indicate the selected settings.
Controls
Support Troubleshooting Tips Installation Instructions Care and
ON/OFF
Turns air conditioner on and off.
Display
Displays the temperature setting. Displays hours when setting the timer.
MODE
On the remote control, use to set the air conditioner to COOL or FAN mode.
On the air conditioner controls, use to set COOL or FAN mode at HIGH, MED or LOW fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected.
TEMP Increase + /Decrease – Pads
Use to set temperature when in COOL mode.
Fan Speeds (Remote control only)
Use to set the fan speed at LOW, MED
or HIGH.
TIMER
Each touch will set the time in half hours up to 10 and then in hours up to 24.
To cancel the On Timer, press the ON pad until the display time disappears.
To cancel the Off Timer, press the OFF pad until the display time disappears.
SLEEP
Press to set the air conditioner to run for
8 hours before it automatically returns to the previous setting.
When the sleep timer is set, the set temperature will automatically increase 2°F after the second hour then 1°F each hour over the next two hours.
To cancel the sleep mode, press the
MODE pad or the SLEEP pad a second time.
Remote Control Signal Receiver
NOTE: When the air conditioner is turned on,
it will automatically start in the setting last used.
Consumer
Remote Control
nTo ensure proper operation, aim the remote control at the signal receiver on the air conditioner.
4n The remote control signal has a range of up to 21 feet.
nMake sure nothing is between the air conditioner and the remote control that could block the signal.
nMake sure batteries are fresh and installed