Samsung NH300WHXES Field Setting Mode, Setting the Field Setting Value of wired remote controller

Page 29

FIELD SETTING MODE

Setting the Field Setting Value of wired remote controller

Field setting mode is to adjust specific functions in accordance with customer’s demands.

Field setting mode is easy-to-access and programmable by the wired remote controller of hydro unit.

Field setting values are consisted of 4 digits.

Sub menu

Main menu

Adjusting filed setting values is available in the unit operation.

Default field setting value and range is on 32~34 pages.

1.Press the Test button for 5 seconds. The mode changes to the field setting.

In this mode, you can only use Up, Down, Set,

Cancel/Delete button.

To cancel the setting, press Cancel/Delete button.

2. Set the Main Menu by pressing Up or Down button.

The “Number” will blink. Set the Main menu and press Set button to save the setting.

3. Set the Sub Menu by pressing Up or Down button.

The “Number” will blink. Set the Sub menu by pressing Up or Down button. Then press Set button to save the setting.

4. Set the Operation Range(Field Setting) by pressing Up or Down button.

The digits in “Temp” category will blink. Set the Field Setting Value by pressing Up or Down button. Then press Set button to save the settings.

After 5 seconds, The LCD shall go back to initial display. If no input for setting value changes, the LCD shall go back to initial display after 30 seconds.

ENGLISH

Operating advanced function _29

Image 29

Contents F I P D DB98-32035A2 Air to Water Heat Pump Hydro UnitQuick Heating by TDM Technology High Performance at Low TemperatureIntegrated Heating & Cooling System at a Lower Cost Running Costs-Reduction of Up to 33.3%Contents Important safety symbols and precautions Safety precautionsFor Using This may result in harm to humans, animals or plants Safety informationControl Panel OverviewSpace Operation Mode Checking the function of buttons and indicatorsDHW DHW Operation ModeDisplay Function Temperature AdjustmentHOT KEY Schedule Mode Status Display Function Status IndicatorA2A Optional Function IndicatorOperating basic function Available ModeSpace Heating Operation Space Cooling Operation Water LAW Domestic Water Heating Operation Operating hot key function Urgent DHW ModeTo cancel the DHW mode To cancel the outing mode Outing ModeOperating advanced function Setting the TimeSet, Cancel/Delete button Setting the 7-DAYWEEKLY ScheduleViewing the 7-dayWeekly Schedule On / Off Display Deleting the 7-dayWeekly schedule Setting the Daily Schedule Viewing the Daily Schedule On / Off Display Operating the daily schedule Deleting the daily scheduleSetting the Field Setting Value of wired remote controller Field Setting ModeField Setting Value Field Setting ValueFSV TableDHW BUH/BSH Priority Space Cooling Remote Controller Setting Range CodeSpace Heating DHW HeatingWater Law for Heating Water Law & Room Thermostat CodeExternal Room Thermostat Field Option Water Law for CoolingDHW Heating Code Heat Pump Variables for Controlling DHW Tank DHW Application#3033 Disinfection Function Booster Heater Variables for Controlling DHW TankHeat Pump Variables for Space Heating Space Heating CodeExternal Backup Boiler for Space Heating Field Option Backup Heater Variables for Space HeatingOthers Code Outing Mode Hot Key of Wired Remote ControllerEconomic DHW Heating TDMTime-Division Multi VariablesDIP Switch Setting Temperature TableAppendix Available operation rangeMaintaining the Unit Maintenance activitiesThermistor Troubleshooting TipsE654 TroubleshootingCommunication E912 Water pump & Flow S/WE911 Disposal Requirements Memo 50Memo Memo