Panasonic SC-HTB500 operating instructions Safety precautions, Licenses

Page 3

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire.

Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other places where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.

Licenses

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending.

DTS and the Symbol are registered trademarks

&DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software.

C DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

HDAVI Control™ is a trademark of Panasonic Corporation.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorised service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Operating Instructions

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model No. SC-HTB500 Included Installation InstructionsContinental Europe, Australia and New Zealand OthersFor details, please refer to Licenses Safety precautionsTable of Contents To dispose or transfer this unit AccessoriesClean this unit with a soft, dry cloth Unit careThis unit and active subwoofer Front Standby/on switch Í/IRemote control operation range Distance Control reference guideTo replace a button-type battery Remote controlPlacement This unitOn the wall A rack § 1, 2 If the TV’s remote control sensor is Blocked by this unit Active subwooferIf it persists, move this unit further away from the TV To prevent the unit from falling Assembling the unitHdmi cable not supplied ConnectionsConnection to a TV Basic connection with an ARC compatible TVDo not insert or remove while this unit is on Connection from an Hdmi compatible deviceDigital transmitter connection ≥Connect this unit to the TV Blu-ray Disc PlayerPress C I, B Í on the active subwoofer Active subwoofer wireless connectionAC mains lead connection Set the voltageAudio format indicator Using this unitAudio source indicator To adjust the volume/ subwoofer levelAudio effects Various audio effectsChanging the audio effects Speaker Selection Automatic input switchingWhat is Viera Link Hdavi Control? Linked operations with the TVSpecifications General operation TroubleshootingPower Audio informationActive subwoofer SoundTV Audio Remote control codeChanging this unit’s settings Viera LinkUsing the IR Blaster TV’s remote control signal sensorPlacement example How to replace the fuse For Saudi Arabia and KuwaitBefore use Do not modify the wall mount brackets Do not install at a location that cannot bear the loadDo not install at a location other than a vertical wall For installation, use the special-purpose constituent partsRequests regarding handling Precautions for wall mount bracket installationAttaching the wall mount brackets Installation procedureNever use any other method than specified to install ComponentsComplete all the necessary connections to this unit PlacementChecking the strength of the installation location ConnectionsAttach the lock pins into the wall mount bracket Attaching this unit to a wallThread a cord not supplied through the wall mount bracket Move this unit so that the screw is in this position Push the lock pins fully into placeMount the unit securely onto the screws Attach the cord to a wall with a screw not suppliedInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation
Top Page Image Contents