Panasonic SC-HTB500 operating instructions Placement, This unit, On the wall A rack § 1, 2

Page 8

Placement

Caution

This unit, the supplied wall mount brackets and the active subwoofer are to be used only as indicated in these operating instructions or the installation instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

Do not attempt to attach this unit to a wall using methods other than those described in this manual.

How you place this unit and the active subwoofer can affect the bass and the sound field.

This unit

Place this unit near the TV.

This unit should be placed parallel to the seating position.

E.g.,

On the wall

In a rack§1, 2, 3

On a table§1, 2, 3, 4, 5

To attach this unit to the wall, refer to the installation instructions. (> 23)

Installation work should never be done by any other than a qualified installation specialist.

§1 Place this unit on a flat secure base. (Do not place this unit on the TV’s pedestal.)

§2 To allow for proper ventilation and to allow for proper air flow around this unit, position it with at least 5 mm of space on all sides of this unit.

§3 Secure the unit to prevent it from falling. (> 10)

§4 Do not place this unit in front of a 3D compatible TV. This unit may block the transmitter for the 3D eyewear. §5 Do not place this unit too close to the TV. This unit may interfere with the TV’s various sensors (ambient light, etc.).

You can damage the speakers and shorten their useful life if you play sound at high levels over extended periods.

Placing this unit too close to the floor, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.

Do not use the active subwoofer or this unit in a metal cabinet or bookshelf.

8

Image 8
Contents Included Installation Instructions Model No. SC-HTB500For details, please refer to Continental Europe, Australia and New ZealandOthers Safety precautions LicensesTable of Contents Accessories Clean this unit with a soft, dry clothUnit care To dispose or transfer this unitStandby/on switch Í/I Remote control operation range DistanceControl reference guide This unit and active subwoofer FrontRemote control To replace a button-type batteryOn the wall A rack § 1, 2 PlacementThis unit If it persists, move this unit further away from the TV If the TV’s remote control sensor is Blocked by this unitActive subwoofer Assembling the unit To prevent the unit from fallingConnections Connection to a TVBasic connection with an ARC compatible TV Hdmi cable not suppliedConnection from an Hdmi compatible device Digital transmitter connection≥Connect this unit to the TV Blu-ray Disc Player Do not insert or remove while this unit is onActive subwoofer wireless connection AC mains lead connectionSet the voltage Press C I, B Í on the active subwooferUsing this unit Audio source indicatorTo adjust the volume/ subwoofer level Audio format indicatorChanging the audio effects Audio effectsVarious audio effects Automatic input switching What is Viera Link Hdavi Control?Linked operations with the TV Speaker SelectionSpecifications Troubleshooting PowerAudio information General operationSound Active subwooferRemote control code Changing this unit’s settingsViera Link TV AudioPlacement example Using the IR BlasterTV’s remote control signal sensor Before use How to replace the fuseFor Saudi Arabia and Kuwait Do not install at a location that cannot bear the load Do not install at a location other than a vertical wallFor installation, use the special-purpose constituent parts Do not modify the wall mount bracketsPrecautions for wall mount bracket installation Requests regarding handlingInstallation procedure Never use any other method than specified to installComponents Attaching the wall mount bracketsPlacement Checking the strength of the installation locationConnections Complete all the necessary connections to this unitThread a cord not supplied through the wall mount bracket Attach the lock pins into the wall mount bracketAttaching this unit to a wall Push the lock pins fully into place Mount the unit securely onto the screwsAttach the cord to a wall with a screw not supplied Move this unit so that the screw is in this positionInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation