Panasonic SC-HTB500 Connections, Connection to a TV, Basic connection with an ARC compatible TV

Page 11

Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are complete.

Compatible with FULL HD 3D TV and Blu-ray Player

≥This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV.

Connection to a TV

∫HDMI

The HDMI connection supports VIERA Link “HDAVI Control” (> 16) when used with a compatible Panasonic TV.

≥Use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable.

Recommended part number:

RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.

≥Non-HDMI-compliant cables cannot be utilised.

∫OPTICAL IN

Connect the optical digital audio cable if the TV is not ARC compatible (> below).

Basic connection (with an ARC compatible TV)

ARC (Audio Return Channel)

(Available only when using an ARC compatible TV)

With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cable.

≥Refer to the operating instructions of the TV for the settings to output digital audio.

TV

AV IN (ARC)

HDMI AV OUT (ARC)

AHDMI cable (not supplied)

§Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.)

≥If the connected TV is ARC compatible, but audio is not output to this unit, connect using the optical digital audio cable. (> right, “Basic connection (with an optical digital audio cable compatible TV)”)

Basic connection

 

 

 

(with an optical digital

 

 

 

audio cable compatible

 

 

Instructions

TV)

 

 

 

 

 

TV

OPTICAL

 

 

AV IN

OUT

 

Operating

HDMI AV OUT

 

 

 

 

 

 

 

 

 

OPTICAL DIGITAL

 

 

AUDIO IN

 

 

 

AHDMI cable (not supplied)

BOptical digital audio cable (not supplied)

≥When connected to an ARC compatible TV, set “TV Audio” to “ARC Off” to output the audio signal from the optical digital audio cable. (> 20, “TV Audio”)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No. SC-HTB500 Included Installation InstructionsFor details, please refer to Continental Europe, Australia and New ZealandOthers Licenses Safety precautionsTable of Contents To dispose or transfer this unit AccessoriesClean this unit with a soft, dry cloth Unit careThis unit and active subwoofer Front Standby/on switch Í/IRemote control operation range Distance Control reference guideTo replace a button-type battery Remote controlOn the wall A rack § 1, 2 PlacementThis unit If it persists, move this unit further away from the TV If the TV’s remote control sensor is Blocked by this unitActive subwoofer To prevent the unit from falling Assembling the unitHdmi cable not supplied ConnectionsConnection to a TV Basic connection with an ARC compatible TVDo not insert or remove while this unit is on Connection from an Hdmi compatible deviceDigital transmitter connection ≥Connect this unit to the TV Blu-ray Disc PlayerPress C I, B Í on the active subwoofer Active subwoofer wireless connectionAC mains lead connection Set the voltageAudio format indicator Using this unitAudio source indicator To adjust the volume/ subwoofer levelChanging the audio effects Audio effectsVarious audio effects Speaker Selection Automatic input switchingWhat is Viera Link Hdavi Control? Linked operations with the TVSpecifications General operation TroubleshootingPower Audio informationActive subwoofer SoundTV Audio Remote control codeChanging this unit’s settings Viera LinkPlacement example Using the IR BlasterTV’s remote control signal sensor Before use How to replace the fuseFor Saudi Arabia and Kuwait Do not modify the wall mount brackets Do not install at a location that cannot bear the loadDo not install at a location other than a vertical wall For installation, use the special-purpose constituent partsRequests regarding handling Precautions for wall mount bracket installationAttaching the wall mount brackets Installation procedureNever use any other method than specified to install ComponentsComplete all the necessary connections to this unit PlacementChecking the strength of the installation location ConnectionsThread a cord not supplied through the wall mount bracket Attach the lock pins into the wall mount bracketAttaching this unit to a wall Move this unit so that the screw is in this position Push the lock pins fully into placeMount the unit securely onto the screws Attach the cord to a wall with a screw not suppliedInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation
Top Page Image Contents