Panasonic SC-HTB500 Audio effects, Various audio effects, Changing the audio effects

Page 15

Audio effects

A B CA B C

The various audio effects

Clear-mode Dialog

You can make the dialogue stand out from the background noise and also hear sound as if it is coming from the centre of the TV.

Sound Effect

You can enjoy a dynamic sound with a natural expansion.

Dolby Virtual Speaker

You can enjoy a surround sound effect similar to

5.1ch (Dolby Digital or DTS) with any audio source.

Changing the audio effects

1 Press the button for the respective effect on the remote control.

A: Clear-mode Dialog

B: Sound Effect

C: Dolby Virtual Speaker (VS)

2 The status of the selected effect is indicated for 4 sec.

A: Clear-mode Dialog

B: Sound Effect

C: Dolby Virtual Speaker (VS)

On:

The indicator lights

Off:

The indicator blinks

3 While the indicator is lit or blinking, press the same button again to change the setting.

≥When turning the audio effects on or off, there might be a slight pause in the audio. This is normal.

≥Dolby Virtual Speaker (VS) is also turned on when Sound Effect is turned on. (It will remain on even after Sound Effect is turned off.)

≥If Dolby Virtual Speaker (VS) is turned off while Sound Effect is on, the Sound Effect will also be turned off.

≥The audio format is also indicated when [VS] is pressed. (> 14)

Operating Instructions

15

Image 15

Contents Model No. SC-HTB500 Included Installation InstructionsContinental Europe, Australia and New Zealand OthersFor details, please refer to Licenses Safety precautionsTable of Contents To dispose or transfer this unit AccessoriesClean this unit with a soft, dry cloth Unit careThis unit and active subwoofer Front Standby/on switch Í/IRemote control operation range Distance Control reference guideTo replace a button-type battery Remote controlPlacement This unitOn the wall A rack § 1, 2 If the TV’s remote control sensor is Blocked by this unit Active subwooferIf it persists, move this unit further away from the TV To prevent the unit from falling Assembling the unitHdmi cable not supplied ConnectionsConnection to a TV Basic connection with an ARC compatible TVDo not insert or remove while this unit is on Connection from an Hdmi compatible deviceDigital transmitter connection ≥Connect this unit to the TV Blu-ray Disc PlayerPress C I, B Í on the active subwoofer Active subwoofer wireless connectionAC mains lead connection Set the voltageAudio format indicator Using this unitAudio source indicator To adjust the volume/ subwoofer levelAudio effects Various audio effectsChanging the audio effects Speaker Selection Automatic input switchingWhat is Viera Link Hdavi Control? Linked operations with the TVSpecifications General operation TroubleshootingPower Audio informationActive subwoofer SoundTV Audio Remote control codeChanging this unit’s settings Viera LinkUsing the IR Blaster TV’s remote control signal sensorPlacement example How to replace the fuse For Saudi Arabia and KuwaitBefore use Do not modify the wall mount brackets Do not install at a location that cannot bear the loadDo not install at a location other than a vertical wall For installation, use the special-purpose constituent partsRequests regarding handling Precautions for wall mount bracket installationAttaching the wall mount brackets Installation procedureNever use any other method than specified to install ComponentsComplete all the necessary connections to this unit PlacementChecking the strength of the installation location ConnectionsAttach the lock pins into the wall mount bracket Attaching this unit to a wallThread a cord not supplied through the wall mount bracket Move this unit so that the screw is in this position Push the lock pins fully into placeMount the unit securely onto the screws Attach the cord to a wall with a screw not suppliedInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation