Panasonic SC-HTB500 Mount the unit securely onto the screws, Push the lock pins fully into place

Page 28

9 Mount the unit securely onto the screws.



AMove this unit so that the screw is in this position.

≥Be sure that both the wall mount brackets are securely attached to the screws.

≥If this unit is tilting forward, remove this unit from the screws and adjust by tightening the screws.

10 Push the lock pins fully into place.

 



ARear of this unit B Lock pin (supplied) C Screw (not supplied)

≥Be sure to attach both lock pins correctly.

11 Attach the cord to a wall with a screw (not supplied).

≥Keep the screws out of reach of children to prevent swallowing.

≥Check the strength of the installation location. The position in the wall where the screw is to be attached should be capable of supporting over 20 kg. If the strength at any of these positions is lacking, provide sufficient reinforcement.

E.g.,







ARear of this unit

28 B Fall prevention cord (not supplied)

CScrew eye (not supplied)

Image 28

Contents Included Installation Instructions Model No. SC-HTB500Others Continental Europe, Australia and New ZealandFor details, please refer to Safety precautions LicensesTable of Contents Accessories Clean this unit with a soft, dry clothUnit care To dispose or transfer this unitStandby/on switch Í/I Remote control operation range DistanceControl reference guide This unit and active subwoofer FrontRemote control To replace a button-type batteryThis unit PlacementOn the wall A rack § 1, 2 Active subwoofer If the TV’s remote control sensor is Blocked by this unitIf it persists, move this unit further away from the TV Assembling the unit To prevent the unit from fallingConnections Connection to a TVBasic connection with an ARC compatible TV Hdmi cable not suppliedConnection from an Hdmi compatible device Digital transmitter connection≥Connect this unit to the TV Blu-ray Disc Player Do not insert or remove while this unit is onActive subwoofer wireless connection AC mains lead connectionSet the voltage Press C I, B Í on the active subwooferUsing this unit Audio source indicatorTo adjust the volume/ subwoofer level Audio format indicatorVarious audio effects Audio effectsChanging the audio effects Automatic input switching What is Viera Link Hdavi Control?Linked operations with the TV Speaker SelectionSpecifications Troubleshooting PowerAudio information General operationSound Active subwooferRemote control code Changing this unit’s settingsViera Link TV AudioTV’s remote control signal sensor Using the IR BlasterPlacement example For Saudi Arabia and Kuwait How to replace the fuseBefore use Do not install at a location that cannot bear the load Do not install at a location other than a vertical wallFor installation, use the special-purpose constituent parts Do not modify the wall mount bracketsPrecautions for wall mount bracket installation Requests regarding handlingInstallation procedure Never use any other method than specified to installComponents Attaching the wall mount bracketsPlacement Checking the strength of the installation locationConnections Complete all the necessary connections to this unitAttaching this unit to a wall Attach the lock pins into the wall mount bracketThread a cord not supplied through the wall mount bracket Push the lock pins fully into place Mount the unit securely onto the screwsAttach the cord to a wall with a screw not supplied Move this unit so that the screw is in this positionInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation