Panasonic SC-HTB500 operating instructions Specifications

Page 17

Specifications

GENERAL

Power consumption:

 

This unit:

(Continental Europe, Australia and New

Zealand)

26 W

(Others)

29 W

Active subwoofer: 25 W

Digital transmitter: 1.2 W

Power consumption in standby mode:

This unit: Approx. 0.2 W

Power consumption in off mode:

Active subwoofer: Approx. 0.4 W

Power supply:

(Continental Europe, Australia and New Zealand)

AC 220 V to 240 V, 50 Hz

(Others)

This unit: AC 110 V to 127 V/220 V to 240 V, 50/60 Hz

Active subwoofer: AC 110 V to 240 V, 50/60 Hz

Dimensions (WkHkD):

This unit

(Without wall mount bracket)

1029 mmk108 mmk58 mm (With wall mount bracket)

1029 mmk108 mmk80 mm

Active subwoofer

250 mmk323 mmk356 mm

Digital transmitter

43.5 mmk37.3 mmk8.2 mm

Mass:

This unit

(Without wall mount bracket)

Approx. 2.8 kg

(With wall mount bracket)

Approx. 2.9 kg

Active subwoofer

Approx. 6.7 kg

Digital transmitter

Approx. 0.0095 kg

Operating temperature range:

0 oC to r40 oC

Operating humidity range:

20 % to 80 % RH (no condensation)

AMPLIFIER SECTION

RMS Output Power

Front ch:

60 W per channel (4 ≠), 1 kHz, 10 % THD

Subwoofer ch:

120 W per channel (8 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power: 240 W

(Except Continental Europe, Australia and New Zealand)

PMPO Output Power:

2100 W

SPEAKER SECTION

FRONT SPEAKERS (BUILT-IN)

Type:

1 way, 1 speaker system (Bass Reflex)

Full range:

 

6.5 cm Cone typek2

ACTIVE SUBWOOFER

 

 

Type:

1 way, 1 speaker system (Kelton type)

Woofer:

 

 

16 cm Cone type

Passive radiator:

 

25 cm

Output sound pressure:

78 dB/W (1 m)

Frequency range:

35 Hz to 180 Hz (j16 dB)

 

 

40 Hz to 160 Hz (j10 dB)

TERMINAL SECTION

HDMI

This unit supports “HDAVI Control 5” function.

HDMI input

 

Input connector:

Type A (19 pin)

HDMI AV output

 

Output connector:

Type A (19 pin)

Digital Audio Input (TV only)

 

Optical digital input:

Optical terminal

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Audio Format:

LPCM, Dolby Digital

IR Blaster

 

Terminal 1:

3.5 mm jack

 

WIRELESS SECTION

 

 

 

 

Wireless module

 

Frequency range:

2.4 GHz to 2.4835 GHz

Number of channels:

3

 

 

 

1Specifications are subject to change without notice. Mass and dimensions are approximate.

2Total harmonic distortion is measured by a digital spectrum analyzer.

Operating Instructions

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model No. SC-HTB500 Included Installation InstructionsFor details, please refer to Continental Europe, Australia and New ZealandOthers Licenses Safety precautionsTable of Contents Clean this unit with a soft, dry cloth AccessoriesUnit care To dispose or transfer this unitRemote control operation range Distance Standby/on switch Í/IControl reference guide This unit and active subwoofer FrontTo replace a button-type battery Remote controlOn the wall A rack § 1, 2 PlacementThis unit If it persists, move this unit further away from the TV If the TV’s remote control sensor is Blocked by this unitActive subwoofer To prevent the unit from falling Assembling the unitConnection to a TV ConnectionsBasic connection with an ARC compatible TV Hdmi cable not suppliedDigital transmitter connection Connection from an Hdmi compatible device≥Connect this unit to the TV Blu-ray Disc Player Do not insert or remove while this unit is onAC mains lead connection Active subwoofer wireless connectionSet the voltage Press C I, B Í on the active subwooferAudio source indicator Using this unitTo adjust the volume/ subwoofer level Audio format indicatorChanging the audio effects Audio effectsVarious audio effects What is Viera Link Hdavi Control? Automatic input switchingLinked operations with the TV Speaker SelectionSpecifications Power TroubleshootingAudio information General operationActive subwoofer SoundChanging this unit’s settings Remote control codeViera Link TV AudioPlacement example Using the IR BlasterTV’s remote control signal sensor Before use How to replace the fuseFor Saudi Arabia and Kuwait Do not install at a location other than a vertical wall Do not install at a location that cannot bear the loadFor installation, use the special-purpose constituent parts Do not modify the wall mount bracketsRequests regarding handling Precautions for wall mount bracket installationNever use any other method than specified to install Installation procedureComponents Attaching the wall mount bracketsChecking the strength of the installation location PlacementConnections Complete all the necessary connections to this unitThread a cord not supplied through the wall mount bracket Attach the lock pins into the wall mount bracketAttaching this unit to a wall Mount the unit securely onto the screws Push the lock pins fully into placeAttach the cord to a wall with a screw not supplied Move this unit so that the screw is in this positionInstallation Instructions Digital Transmitter RFAX1032, Active Subwoofer SB-WA500 Norsk Samsvarserklæring DoC Page Ideas for life Suomi Varoitus For business users in the European Union Panasonic Corporation
Top Page Image Contents