IMPORTANT INSTRUCTIONS
WARNING: When using electrical products, basic precautions should always be followed, including the following:
DANGER: Risk of electric shock. Connect only to circuits protected by a
WARNING: Risk of electric shock. A licensed electrician should route all electrical wiring. WARNING: Risk of electric shock. Disconnect power before servicing.
WARNING: Risk of injury or property damage. Please read all instructions thoroughly before beginning installation.
NOTICE: Follow all plumbing, electrical, and building codes.
Specifications
Pressures
Maximum Static Pressure | 125 psi, 862 kPa, 8.6 bar |
Supply Pressure Differential* | Max 5 psi, 34.5 kPa, 0.34 bar (Equal pressures recommended.) |
Minimum Flow Rate | 1.6 gpm (Less than 72 psi dynamic pressure.) |
| 6 lpm (Less than 500 kPa maintaining pressure.) |
| 2.1 gpm (Greater than 72 psi dynamic pressure.) |
| 8 lpm (Greater than 500 kPa maintaining pressure.) |
Temperatures |
|
Programmable Temperature | Max 120°F (49°C) Min 79°F (26°C) Full cold may also be selected. |
Default Temperature at | 102°F (39°C) |
Minimum Mixed Temperature | 3.6°F (2°C) |
Differential from Hot Supply |
|
Optimum Thermostatic Control Range | 86°F (30°C) to 120°F (49°C) |
Temperature Stability at Recommended | +/- 1.6°F (1°C) |
Supply Conditions |
|
Ambient Temperature | Greater than 34°F (1°C), Max 104°F (40°C) |
Maximum Relative Humidity | 95% |
Electrical |
|
Electrical Service | |
User Interface Cable Length (supplied) | 30 ft (9.14 m) |
|
|
*In commercial applications where there is a large difference in hot and cold supply pressures or frequent fluctuation in either supply line is anticipated, it is strongly recommended that pressure regulators be installed.
2 | Kohler Co. |