Kohler K-T16116, K-T16115, K-T16139 Complete the Installation, Install the Faceplate and Handle

Page 10

Install the Faceplate and Handle (cont.)

Align the handle and the base assembly. Press the handle onto the valve stem.

Secure the handle in place with the setscrew. Tighten the setscrew to one quarter-turn past hand-tight.

6. Complete the Installation

Turn the valve fully counterclockwise to the off position.

Remove the aerator assembly from the spout by turning it counterclockwise.

Turn on the main water supply.

Turn the valve to the center and run water for approximately one minute to ¯ush the system.

Check all connections for leaks.

Reinstall the aerator.

1025255-2-C

10

Kohler Co.

Image 10

Contents Installation Guide Important Instructions Thank You For Choosing Kohler Company Tools and MaterialsBefore You Begin Install the Spout Threaded SpoutsInstall the Showerhead Installing the Standard ShowerheadInstall the Showerhead Installing the Nonstandard Showerhead Water Temperature Adjustment Standard High Flow ValveDiverter Assembly Diverter AssemblyScroll Handle Install the Faceplate and HandleTraditional Handle Complete the Installation Install the Faceplate and HandleInstructions Importantes Avant de commencer Outils et matérielsMerci davoir choisi la compagnie Kohler Instructions ImportantesAvant de commencer Installer le bec Becs à visserInstaller la pomme de douche Installer une pomme de douche standardInstaller la pomme de douche Installer la pomme de douche non-standardRéglage de la température deau Valve Valve haut standard débitEnsemble inverseur Ensemble inverseurPoignée à roulement Installer le couvercle et la poignéePoignée traditionnelle Compléter linstallation Installer le couvercle et la poignéeInstrucciones Importantes Antes de comenzar Herramientas y materialesGracias por elegir los productos de Kohler Instrucciones ImportantesAntes de comenzar Instale el surtidor Surtidores de montaje roscadoInstale la cabeza de ducha Instalación de una cabeza de ducha estándarInstale la cabeza de ducha Instalación de una cabeza de ducha no estándarAjuste de la temperatura del agua Válvula de Alto flujo EstándarMontaje del desviador Montaje del desviadorManija de espiral Instale la placa frontal y la manijaManija tradicional Termine la instalación Instale la placa frontal y la manija1025255-2-C 1025255-2-C