Kohler K-T16114, K-T16115, K-T16116 Install the Showerhead, Installing the Standard Showerhead

Page 5

Apply plumbers putty.

Escutcheon

Standard

Shower Arm

Shower	Shower Arm

Elbow	Setscrew

Showerhead

Apply plumbers putty.

Nonstandard

1/2"Shower Arm

Nipple

1/2"

2. Install the Showerhead

CAUTION: Risk of product damage. To avoid clogging the showerhead spray outlets, use thread sealant tape on the shower arm threads. Do not use thread sealant compound (pipe dope).

NOTE: A standard showerhead is shown.

Installing the Standard Showerhead

Remove the temporary nipple from the shower elbow.

Apply a bead of plumbers putty or other sealant to the back of the escutcheon according to the manufacturer's instructions.

Slide the escutcheon over the shower arm.

Apply thread sealant tape and install the shower arm to the shower elbow.

Carefully tighten with a clean strap wrench.

Press the escutcheon against the ®nished wall and secure with the setscrew.

Remove all excess putty.

Turn the main water supply on.

Run hot and cold water through the shower arm to ¯ush out dirt and debris.

Apply thread sealant tape to the shower arm and thread the showerhead to the shower arm.

Kohler Co.

5

1025255-2-C

Image 5

Contents Installation Guide Important Instructions Before You Begin Tools and MaterialsThank You For Choosing Kohler Company Threaded Spouts Install the SpoutInstalling the Standard Showerhead Install the ShowerheadInstall the Showerhead Installing the Nonstandard Showerhead Standard High Flow Valve Water Temperature AdjustmentDiverter Assembly Diverter AssemblyTraditional Handle Install the Faceplate and HandleScroll Handle Install the Faceplate and Handle Complete the InstallationInstructions Importantes Merci davoir choisi la compagnie Kohler Outils et matérielsAvant de commencer Instructions ImportantesAvant de commencer Becs à visser Installer le becInstaller une pomme de douche standard Installer la pomme de doucheInstaller la pomme de douche non-standard Installer la pomme de doucheValve Valve haut standard débit Réglage de la température deauEnsemble inverseur Ensemble inverseurPoignée traditionnelle Installer le couvercle et la poignéePoignée à roulement Installer le couvercle et la poignée Compléter linstallationInstrucciones Importantes Gracias por elegir los productos de Kohler Herramientas y materialesAntes de comenzar Instrucciones ImportantesAntes de comenzar Surtidores de montaje roscado Instale el surtidorInstalación de una cabeza de ducha estándar Instale la cabeza de duchaInstalación de una cabeza de ducha no estándar Instale la cabeza de duchaVálvula de Alto flujo Estándar Ajuste de la temperatura del aguaMontaje del desviador Montaje del desviadorManija tradicional Instale la placa frontal y la manijaManija de espiral Instale la placa frontal y la manija Termine la instalación1025255-2-C 1025255-2-C