Kohler K-T16117, K-T16115, K-T16116, K-T16139, K-T16113, K-T16114 Install the Spout, Threaded Spouts

Page 4

Threaded Spouts

Nipple

3-7/8"

(9.8 cm)

Apply plumbers putty.

1. Install the Spout

CAUTION: Risk of internal seal damage. Do not use petroleum-based lubricants when installing slip-®t spouts. If the spout will not slide over the tubing, use soapy water or a silicone-based lubricant.

Remove the temporary nipple.

Apply thread sealant and install a 1/2″ nipple so it extends 7/16″ (1.1 cm) beyond the ®nished wall.

Apply a bead of plumbers putty or other sealant around the inlet end of the spout according to the manufacturer's instructions.

Apply thread sealant to the nipple and thread the spout onto the nipple.

Carefully tighten with a clean strap wrench.

Remove all excess putty.

1025255-2-C

4

Kohler Co.

Image 4

Contents Installation Guide Important Instructions Thank You For Choosing Kohler Company Tools and MaterialsBefore You Begin Install the Spout Threaded SpoutsInstall the Showerhead Installing the Standard ShowerheadInstall the Showerhead Installing the Nonstandard Showerhead Water Temperature Adjustment Standard High Flow ValveDiverter Assembly Diverter AssemblyScroll Handle Install the Faceplate and HandleTraditional Handle Complete the Installation Install the Faceplate and HandleInstructions Importantes Outils et matériels Merci davoir choisi la compagnie KohlerAvant de commencer Instructions ImportantesAvant de commencer Installer le bec Becs à visserInstaller la pomme de douche Installer une pomme de douche standardInstaller la pomme de douche Installer la pomme de douche non-standardRéglage de la température deau Valve Valve haut standard débitEnsemble inverseur Ensemble inverseurPoignée à roulement Installer le couvercle et la poignéePoignée traditionnelle Compléter linstallation Installer le couvercle et la poignéeInstrucciones Importantes Herramientas y materiales Gracias por elegir los productos de KohlerAntes de comenzar Instrucciones ImportantesAntes de comenzar Instale el surtidor Surtidores de montaje roscadoInstale la cabeza de ducha Instalación de una cabeza de ducha estándarInstale la cabeza de ducha Instalación de una cabeza de ducha no estándarAjuste de la temperatura del agua Válvula de Alto flujo EstándarMontaje del desviador Montaje del desviadorManija de espiral Instale la placa frontal y la manijaManija tradicional Termine la instalación Instale la placa frontal y la manija1025255-2-C 1025255-2-C