Kohler K-T16115, K-T16116 Install the Faceplate and Handle, Scroll Handle, Traditional Handle

Page 9

		Faceplate
Faceplate	Discard plaster	Screw
Faceplate	guard with dome.

O-Ring

		Base	Washer
		Base
		Setscrew	Bonnet
			Bonnet
	Sleeve	Scroll	Traditional
	Valve Stem	Scroll	Handle
	Valve Stem	Handle	Handle
	Slot	Handle
	Screw

5. Install the Faceplate and Handle

CAUTION: Risk of product damage to the K-306-KS valve assembly. When using this valve in a ®berglass or acrylic installation, use the Thin Wall Installation Kit (88526).

Remove and discard the plaster guard and/or dome, if installed. Rotate the valve stem fully counterclockwise to the ″Off″ position.

Install the faceplate onto the valve. Secure with two screws. Do not overtighten.

Slide the sleeve over the valve stem with the slot down and facing outward.

Scroll Handle

Install the handle to the base.

Secure with a screw.

Align the handle assembly and press it onto the valve stem.

Secure the handle in place with the setscrew. Tighten the setscrew to one quarter-turn past hand-tight.

Traditional Handle

Assemble the handle and bonnet.

Install the washer and O-ring onto the base.

Fit the handle assembly to the base.

Secure with a screw.

Kohler Co.

9

1025255-2-C

Image 9

Contents Installation Guide Important Instructions Tools and Materials Thank You For Choosing Kohler CompanyBefore You Begin Threaded Spouts Install the SpoutInstalling the Standard Showerhead Install the ShowerheadInstall the Showerhead Installing the Nonstandard Showerhead Standard High Flow Valve Water Temperature AdjustmentDiverter Assembly Diverter AssemblyInstall the Faceplate and Handle Scroll HandleTraditional Handle Install the Faceplate and Handle Complete the InstallationInstructions Importantes Merci davoir choisi la compagnie Kohler Outils et matérielsAvant de commencer Instructions ImportantesAvant de commencer Becs à visser Installer le becInstaller une pomme de douche standard Installer la pomme de doucheInstaller la pomme de douche non-standard Installer la pomme de doucheValve Valve haut standard débit Réglage de la température deauEnsemble inverseur Ensemble inverseurInstaller le couvercle et la poignée Poignée à roulementPoignée traditionnelle Installer le couvercle et la poignée Compléter linstallationInstrucciones Importantes Gracias por elegir los productos de Kohler Herramientas y materialesAntes de comenzar Instrucciones ImportantesAntes de comenzar Surtidores de montaje roscado Instale el surtidorInstalación de una cabeza de ducha estándar Instale la cabeza de duchaInstalación de una cabeza de ducha no estándar Instale la cabeza de duchaVálvula de Alto flujo Estándar Ajuste de la temperatura del aguaMontaje del desviador Montaje del desviadorInstale la placa frontal y la manija Manija de espiralManija tradicional Instale la placa frontal y la manija Termine la instalación1025255-2-C 1025255-2-C