Samsung SHR-6042P, SHR-6040P manual Real panel jacks

Page 11

Real panel jacks

8

9

10

7

6

5 4 3 2 1

1

DC-IN

This is the connector for a 12V power socket.

 

 

 

 

ALARM/RS485

ALARM IN 1~4: This is the port for an alarm input.

2

ALARM OUT 1~2: This is the port for an alarm output.

 

 

RS485: This is the port for connecting PTZ.

3

USB

This is the port for connecting a USB type of device.

It is used when you backup a video data or upgrade the system software.

 

 

 

AUDIO

AUDIO OUT: This is the port (RCA Jack) for an audio signal output.

4

(When outputting an audio signal, please use the speaker with a built-in audio amplifier.)

 

 

AUDIO IN: This is the port (RCA Jack) for an audio signal input.

5

SPOT OUT

This is the port (BNC-type) for the SPOT OUT output.

 

 

 

6

THROUGH

The THROUGH port can be used to send a video signal to another video device.

 

 

 

7

VIDEO-IN

This port is the port (BNC-type) for a composite video signal input.

It supports both the NTSC and PAL video signals.

 

 

8

VGA

This is the port for the VGA signal output.

 

 

 

9

VIDEO OUT

This is the port (BNC-type) for a composite audio signal output.

 

 

 

10

NETWORK

This is the port for connecting to a network.

 

 

 

01 introducing your real time DVR

introducing your real time DVR_07

Image 11 Contents
Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations System Shutdown BatteryOperating Temperature Before startContents Search and play Appendix Controls on the DVR Introducing your real time DVRName Function HDD, this LED repeatedly blinks This LED indicates the status of backup operationWhen an alarm occurs, it cancels the alarm Set up the audio On/Off functionDisplay the 9-split screens Time set from the system setupDisplay the 4-split screens SelectionReal panel jacks Using the Numeric Buttons Remote controlMenu PresetStop ZoomChecking installation environment InstallationTo the Video in terminal with the system’s power turned off Connecting video, audio, and monitorInternet Connecting the networkConnecting to Internet through Ethernet 10/100BaseT Connecting to Internet through AdslConnecting the alarm input Connecting the alarm output Connecting the USB Connecting the RS-485 deviceLive screen icons Live screen modeLive Operating the systemLive screen modes Freezing and zooming Setting the audio on/offZoom function Event monitoringSpot-out monitoring System Menu setupUser login Before usePassword Time/Date/Language SetupGroup Authority User Add/DelSystem Log Profile REC SFX Backup Success/Failure Login/Logout with the Search ModeAVI Backup Success/Failure SDB Backup Success/FailureHDD Setup System Information & Setup HDD END  HDD END AlarmCamera  HDD FormatPTZ Device Camera ConfigurationScreen Setup  Event Monitoring Duration Remote Control DeviceLive Mode Monitoring Camera Spot Mode Event Duration  Normal DurationCIF Record modeEvent Record Setup Event record State Alarm Detection Setup Alarm Out  Post Event Sensitivity Motion Detection SetupVideo Loss Detection Setup 10~300 Seconds Sets the duration for alarm outputRecord schedule BackupModel Size IP SetupNetwork Web Viewer Port Settings Network Status Ddns SetupNTP Setup NTP Setup NTP Enable ISO  Stmp Server Transfer Picture Setup Smtp Server Authentication Method  Authentication Method PAN PTZ camera control modePTZ camera control Basic operation of pan, tilt & zoomPreset setup PTZ device menu setupCamera Preset Name SettingsCamera menu setup You can set the name of each PresetEvent recording RecordingRecnormal recording Date Color Description Search and playSearch screen Search date & time selectionPlayback Search channel selection & recording graphSingle Screen  Play Screen Mode Split Screen Viewing One Scene at a Time  Audio On/OffNet Net I Setup toolAppendix Reply message Comments To modify the registered device Viewing the device-related settingsNet I Live Viewer Viewing area Using layoutsCamera Tree area Camera Controls areaQuery Generator area Device Firmware UpdateTo update device firmware Net I Search ViewerBefore use Edit User Group Authority User Administration Edit PasswordReset Add/Remove UserEnable/Disable Camera SettingsVideo Settings PTZ Device SettingsRecording Mode Monitoring ModeEvent Recording Mode Sensitivity Motion Detection SettingsVideo Loss Detection Settings Motion Detection ZoneNTP Configuration Network SettingsIP Configuration Web Viewer Port SettingSDB Viewer Image Transmission SettingsUsed to adjust the frame rate of individual cameras Used to configure the picture quality of individual camerasSpeed Main Window of SDB ViewerSkip Digital Zoom BackupVoice Playback Setting ZoomIntroducing Web Viewer SFX playerSFX Player Execution Memory Connecting WEB ViewerSystem Requirements CPUAppendix OSD Information Display Using Live ViewerConnected DVR Full Screen ModeYou can change the split mode by clicking each number icon SPLIT-SCREENSaving the Live Screen on the PC Changing the Live Screen ModeQuad MODE, the screen refreshes at the preset interval Changing the Live Screen Channel Using PTZ CameraYou can save the preset up to SPLIT-SCREEN Using Search ViewerOnly Single and Quad Mode are available in Search menu Searching the Recorded Video in the Calendar Controlling Playback Normal ModeExtension Mode Searching the Recorded Video in the TimelinePop-up Menu Names FeaturesPop-up menu Video This button controls PTZ directions at PTZ modeIt executes Freeze feature at Live screen If user press Enter button, the pop-up menu will disappearSHR-6040 SHR-6042 SpecificationsOutline drawings TroubleshootingsFAQ Properly Color or in abnormal shapeCause Connected sensors are not workingPreamble Open source license report on the productGNU General Public License Appendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to Appendix Executable Foundation No WarrantyHow to Apply These Terms to Your New Libraries END of Terms and ConditionsLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 96 pages 13.66 Kb Manual 96 pages 31.91 Kb Manual 96 pages 49.16 Kb Manual 96 pages 55.63 Kb Manual 96 pages 1.09 Kb