Samsung SHR-6040P, SHR-6042P manual Operating the system, Live screen mode, Live screen icons

Page 20

live

Operating the system

Turn on the power and the following Samsung logo appears.

Perform the initialization job to operate the system after the logo screen has appeared.

The live video appears if the initialization process is normally completed.

It may take about 40 to 60 seconds until the live video appears.

When the live video appears, the system setup environment set previously will be maintained; and if the system has been re-started, the live video will appear and you can start recording.

When installing a new HDD, it may require much more time until the live video appears due to the HDD initialization time.

If the live video does not appear, please check whether the internal and external connections are normal. If the problem persists, please contact the place where you have purchased this product.

Live screen mode

Live screen icons

The live screen icon indicates the setup and function status of each screen.

CAM_01

V.Loss

CAM_01

: Recording Icon

It indicates the states of REC recording / Event (motion + alarm) / Continuous recording.

: Recording Video Size Icon

It shows the respective recording sizes of Large/Normal/ CIF.

Large: Full D1 - (NTSC) 704X480 (PAL) 704X576

Normal: Half D1 – (NTSC) 704X240 (PAL) 704X288

CIF: CIF - (NTSC) 352X240

(PAL) 352X288

16_ live

Image 20

Contents Real Time DVR Key features of your DVR WHAT’S Included with Your DVRSafety regulations Battery Operating TemperatureBefore start System ShutdownContents Search and play Appendix Introducing your real time DVR Controls on the DVRName Function This LED indicates the status of backup operation When an alarm occurs, it cancels the alarmSet up the audio On/Off function HDD, this LED repeatedly blinksTime set from the system setup Display the 4-split screensSelection Display the 9-split screensReal panel jacks Remote control Using the Numeric ButtonsPreset StopZoom MenuInstallation Checking installation environmentConnecting video, audio, and monitor To the Video in terminal with the system’s power turned offConnecting the network Connecting to Internet through Ethernet 10/100BaseTConnecting to Internet through Adsl InternetConnecting the alarm input Connecting the alarm output Connecting the RS-485 device Connecting the USBLive screen mode LiveOperating the system Live screen iconsLive screen modes Setting the audio on/off Freezing and zoomingZoom function Event monitoringSpot-out monitoring Menu setup User loginBefore use SystemTime/Date/Language Setup PasswordUser Add/Del Group AuthorityProfile System Log REC Login/Logout with the Search Mode AVI Backup Success/FailureSDB Backup Success/Failure SFX Backup Success/FailureSystem Information & Setup HDD Setup HDD END Alarm Camera HDD Format  HDD ENDPTZ Device Camera ConfigurationScreen Setup Remote Control Device Live ModeMonitoring  Event Monitoring DurationSpot Mode  Event Duration Normal Duration  CameraRecord mode Event Record SetupEvent record CIFAlarm Detection Setup  Alarm Out Post Event  StateMotion Detection Setup Video Loss Detection Setup10~300 Seconds Sets the duration for alarm output  SensitivityBackup Record scheduleModel Size IP SetupNetwork Web Viewer Port Settings Ddns Setup Network StatusNTP Setup NTP Setup NTP Enable ISO Transfer Picture Setup  Smtp Server Authentication Method Authentication Method  Stmp ServerPTZ camera control mode PTZ camera controlBasic operation of pan, tilt & zoom  PANPTZ device menu setup Preset setupPreset Name Settings Camera menu setupYou can set the name of each Preset CameraEvent recording RecordingRecnormal recording Search and play Search screenSearch date & time selection Date Color DescriptionSearch channel selection & recording graph Playback Play Screen Mode Split Screen  Viewing One Scene at a Time Audio On/Off Single ScreenNet Net I Setup toolAppendix Reply message Comments To modify the registered device Viewing the device-related settingsNet I Live Viewer Using layouts Camera Tree areaCamera Controls area Viewing areaDevice Firmware Update To update device firmwareNet I Search Viewer Query Generator areaBefore use User Administration Edit Password ResetAdd/Remove User Edit User Group AuthorityCamera Settings Video SettingsPTZ Device Settings Enable/DisableMonitoring Mode Recording ModeEvent Recording Mode Motion Detection Settings Video Loss Detection SettingsMotion Detection Zone SensitivityNetwork Settings IP ConfigurationWeb Viewer Port Setting NTP ConfigurationImage Transmission Settings Used to adjust the frame rate of individual camerasUsed to configure the picture quality of individual cameras SDB ViewerSpeed Main Window of SDB ViewerSkip Backup Voice Playback SettingZoom Digital ZoomIntroducing Web Viewer SFX playerSFX Player Execution Connecting WEB Viewer System RequirementsCPU MemoryAppendix Using Live Viewer OSD Information DisplayFull Screen Mode You can change the split mode by clicking each number iconSPLIT-SCREEN Connected DVRSaving the Live Screen on the PC Changing the Live Screen ModeQuad MODE, the screen refreshes at the preset interval Using PTZ Camera Changing the Live Screen ChannelYou can save the preset up to Using Search Viewer SPLIT-SCREENOnly Single and Quad Mode are available in Search menu Searching the Recorded Video in the Calendar Normal Mode Extension ModeSearching the Recorded Video in the Timeline Controlling PlaybackPop-up Menu Names FeaturesPop-up menu This button controls PTZ directions at PTZ mode It executes Freeze feature at Live screenIf user press Enter button, the pop-up menu will disappear VideoSpecifications SHR-6040 SHR-6042Outline drawings TroubleshootingsFAQ Color or in abnormal shape CauseConnected sensors are not working ProperlyPreamble Open source license report on the productGNU General Public License Appendix No Warranty How to Apply These Terms to Your New Programs Repair or CorrectionWe protect your rights with a two-step method You must cause the whole of the work to Appendix Executable No Warranty How to Apply These Terms to Your New LibrariesEND of Terms and Conditions FoundationOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product

Related manuals

Manual 96 pages 13.66 Kb

Manual 96 pages 31.91 Kb

Manual 96 pages 56.34 Kb

Manual 96 pages 49.16 Kb

Manual 96 pages 55.63 Kb

Manual 96 pages 1.09 Kb