Samsung SHR-6042P, SHR-6040P manual Event Recording Mode

3. Recording Schedule Display:

Allows the user to schedule various recording modes for individual cameras. Select a desired recording mode and drag using the mouse to designate the timeframe.

4. Recording Mode:

Displays various recording modes that are available. Select a desired recording mode and drag over to the schedule line using the mouse to assign. Continuous: Refers to continuous recording

regardless of an event occurrence. Motion Detection: Refers to recording only when

motion is detected.

Sensor: Refers to recording only when a sensor (alarm-in) event is detected.

Event Recording Mode

Event Recording Settings

This tab is used to configure each camera’s event recording settings (frame rate, picture quality, resolution, pre- and post-event recording durations).

1

2

3

4

5

6

1. Reset:

Resets all settings to their default values.

2. Frame Rate:

Used to configure event recording frame rate.

3. Picture Quality:

Used to configure the level of recording quality.

4. Resolution:

Used to configure the recording resolution.

5. Pre-Event:

Used to configure the duration of recording leading up to an event.

6. Post-Event:

Used to configure the duration of recording following an event.

Alarm Detection Settings

Alarm detection bases on sensor signals to trigger recording and/or sound the alarm when an event is detected.

2

3

4 1

5	09
	appendix

1. Sensor Channel:

Select the sensor (alarm-in) you wish to configure.

2. Sensor Mode:

Set sensor mode to N.O or N.C.

3. Camera:

Select the camera(s) you wish to assign to the selected sensor. The selected camera(s) will start recording when a sensor event occurs.

4. Alarm:

Used to configure the alarm to sound when a sensor event is detected.

5. Duration:

Used to configure the event-triggered alarm duration.

appendix _57