![](/images/new-backgrounds/1228014/228014105x1.webp)
When the address type is S1 DDNS
4.Input the values for each address type.
5.Enter the user ID and password and click Register.
If Cancel is selected, the values return to the original settings.
When the MAC address needs to be input depending on the firmware version, the MAC address is required to be input.
When the configuration completes, the registered device is displayed on the physical view tree.
If any registration problem occurs, it is displayed on the reply message box. The possible errors are like the following:
Reply message | Comments |
|
Unused Device | It is a unknown device. |
|
Parameter Error | The registered parameters |
|
| are wrong. |
|
Disconnected | The device is disconnected. | 09 |
Not Connected | The device is not listed on | appendix |
| status. | |
| the network. |
|
Network Error | The network is not in good |
|
|
|
|
Wrong Address | The device has a wrong |
|
| address. |
|
Wrong User ID | The input user ID is wrong. |
|
Wrong Password | The input password is |
|
| wrong. |
|
The |
| |
| failed. |
|
Access Conflicted | Access conflict has |
|
| happened. |
|
Exceed the Fixed | Accessed users are out of |
|
Number of People | limit. |
|
Authority Error | User authorization has |
|
| failed. |
|
Can’t Receive Device’s | The system cannot receive |
|
Response | responses from the device. |
|
MAC Address | Duplicate MAC addresses |
|
Conflicted | exist. |
|
IP Address Conflicted | Duplicate IPs exist. |
|
Unknown Error | A unknown error has |
|
| occurred. |
|