Samsung SHR-6042P, SHR-6040P manual Network, IP Setup, Model Size

Page 39

MODEL

SIZE

SONY

512MB, 1GB, 2GB

TRANSCEND

128MB, 2GB, 4GB

SAMSUNG

1GB, 2GB

AXXEN

1GB

SANDISK

256MB

Dadam

640MB

LG XTICK

1GB

AXIAN

256MB

Camera

Sets the camera channel for backup.

Format

It Supports USB-format functions.

The backup file can be played on PC, but can not be played from a DVR.

In case of the AVI backup, you may need a DivX codec to play the saved file. You can obtain the DivX codec from the website www.divx.com.

A warning message appears if no backup device exists.

For a watermark, insert a mark that only the manufacturer knows into the video data lest a person should identify the mark with naked eyes. If the saved video data are forged or altered, "Tampered" will be displayed on the screen of the SDB Viewer or SFX Player.

If not, "Approved" will be displayed.

 

Please do not remove the storage device

Caution

during backup or do not turn off the

system power. The system may run

 

abnormally.

 

The system speed may be slowed down

 

during backup.

 

When backing up the data to CD,

 

the recorded data may be damaged

 

according to the conditions of disk

 

recording surface.

Network

The details of the network menu are as follows:

SHR-6042/6040 MENU

System

►

 

 

 

 

 

 

Camera

►

 

 

 

 

 

 

Monitoring

►

IP Setup

 

 

 

Web Viewer Port Setting

 

Record Mode

 

 

 

 

Network Status

 

Event Record

►

 

DDNS Setup

 

 

 

 

Record Schedule

 

 

 

NTP Setup

 

Backup

 

Call Back Setup

 

Network

►

Transfer Picture Setup

 

 

 

 

 

Move/Control

 

Select

Exit

IP Setup

IP Setup

Connection Mode

NOT USE

 

ID/Password

USER

 

Site IP

000.000.000.000

 

Subnet Mask

255.255.255.000

 

Gateway

000.000.000.000

 

Port (TCP)

554

 

BandWidth

10Mbps

 

 

 

 

OK Cancel

Connection Mode

Sets the network type for the main system.

Press the Enter() button and select the network by using the or button.

NOT USE: Select it when you do not use a network.

STATIC-IP: Select it when the main system is connected to the network that is using the fixed IP. DHCP: Select it when the main system is connected to the network whose IP address is dynamically assigned by DHCP.

ADSL(PPPoE): Select it when the main system is connected to the ADSL network using PPPoE.

ID/Password

You can manually enter the ID/PASSWORD when ADSL is selected.

When the main system is connected to the ADSL network, you need to enter the user ID and password provided by the ADSL carrier. The user ID and password may be entered by using the virtual keyboard.

05 menu setup

menu setup _35

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations System Shutdown BatteryOperating Temperature Before startContents Search and play Appendix Controls on the DVR Introducing your real time DVRName Function HDD, this LED repeatedly blinks This LED indicates the status of backup operationWhen an alarm occurs, it cancels the alarm Set up the audio On/Off functionDisplay the 9-split screens Time set from the system setupDisplay the 4-split screens SelectionReal panel jacks Using the Numeric Buttons Remote controlMenu PresetStop ZoomChecking installation environment InstallationTo the Video in terminal with the system’s power turned off Connecting video, audio, and monitorInternet Connecting the networkConnecting to Internet through Ethernet 10/100BaseT Connecting to Internet through AdslConnecting the alarm input Connecting the alarm output Connecting the USB Connecting the RS-485 deviceLive screen icons Live screen modeLive Operating the systemLive screen modes Freezing and zooming Setting the audio on/offEvent monitoring Spot-out monitoringZoom function System Menu setupUser login Before usePassword Time/Date/Language SetupGroup Authority User Add/DelSystem Log Profile REC SFX Backup Success/Failure Login/Logout with the Search ModeAVI Backup Success/Failure SDB Backup Success/FailureHDD Setup System Information & Setup HDD END  HDD END AlarmCamera  HDD FormatCamera Configuration Screen SetupPTZ Device  Event Monitoring Duration Remote Control DeviceLive Mode Monitoring Camera Spot Mode Event Duration  Normal DurationCIF Record modeEvent Record Setup Event record State Alarm Detection Setup Alarm Out  Post Event Sensitivity Motion Detection SetupVideo Loss Detection Setup 10~300 Seconds Sets the duration for alarm outputRecord schedule BackupIP Setup NetworkModel Size Web Viewer Port Settings Network Status Ddns SetupNTP Setup  NTP EnableNTP Setup ISO  Stmp Server Transfer Picture Setup Smtp Server Authentication Method  Authentication Method PAN PTZ camera control modePTZ camera control Basic operation of pan, tilt & zoomPreset setup PTZ device menu setupCamera Preset Name SettingsCamera menu setup You can set the name of each PresetRecording Recnormal recordingEvent recording Date Color Description Search and playSearch screen Search date & time selectionPlayback Search channel selection & recording graphSingle Screen  Play Screen Mode Split Screen Viewing One Scene at a Time  Audio On/OffNet I Setup tool AppendixNet Reply message Comments Viewing the device-related settings Net I Live ViewerTo modify the registered device Viewing area Using layoutsCamera Tree area Camera Controls areaQuery Generator area Device Firmware UpdateTo update device firmware Net I Search ViewerBefore use Edit User Group Authority User Administration Edit PasswordReset Add/Remove UserEnable/Disable Camera SettingsVideo Settings PTZ Device SettingsRecording Mode Monitoring ModeEvent Recording Mode Sensitivity Motion Detection SettingsVideo Loss Detection Settings Motion Detection ZoneNTP Configuration Network SettingsIP Configuration Web Viewer Port SettingSDB Viewer Image Transmission SettingsUsed to adjust the frame rate of individual cameras Used to configure the picture quality of individual camerasMain Window of SDB Viewer SkipSpeed Digital Zoom BackupVoice Playback Setting ZoomSFX player SFX Player ExecutionIntroducing Web Viewer Memory Connecting WEB ViewerSystem Requirements CPUAppendix OSD Information Display Using Live ViewerConnected DVR Full Screen ModeYou can change the split mode by clicking each number icon SPLIT-SCREENChanging the Live Screen Mode Quad MODE, the screen refreshes at the preset intervalSaving the Live Screen on the PC Changing the Live Screen Channel Using PTZ CameraYou can save the preset up to SPLIT-SCREEN Using Search ViewerOnly Single and Quad Mode are available in Search menu Searching the Recorded Video in the Calendar Controlling Playback Normal ModeExtension Mode Searching the Recorded Video in the TimelineNames Features Pop-up menuPop-up Menu Video This button controls PTZ directions at PTZ modeIt executes Freeze feature at Live screen If user press Enter button, the pop-up menu will disappearSHR-6040 SHR-6042 SpecificationsOutline drawings TroubleshootingsFAQ Properly Color or in abnormal shapeCause Connected sensors are not workingOpen source license report on the product GNU General Public LicensePreamble Appendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to Appendix Executable Foundation No WarrantyHow to Apply These Terms to Your New Libraries END of Terms and ConditionsLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 96 pages 13.66 Kb Manual 96 pages 31.91 Kb Manual 96 pages 56.34 Kb Manual 96 pages 49.16 Kb Manual 96 pages 55.63 Kb Manual 96 pages 1.09 Kb
Top Page Image Contents