Motion Detection Setup
Motion Detection Setup |
| |
None |
| |
Duration |
|
|
Sensitivity | High |
|
Area Set |
|
|
Default | OK | Cancel |
Set the motion detection area, sensitivity and alarm for each camera video.
Press the Enter(
) button after moving the cursor on the camera to be set.
Alarm Out
It sets the alarm output when a motion is detected. Currently the system supports 2 Alarm Out functions and 1
Duration
Sets the duration for Alarm Out. The alarm sound is sustained for the preset period.
CONTINUE: The alarm output sound will be maintained until it is cancelled by pressing the ALARM button manually on the front panel.
10~300 Seconds: Sets the duration for alarm output.
Sensitivity
It relates to configuration for motion detection and sensitivity.
The sensitivity can be set to Very High, High, Medium, Low or Very Low.
Area Set
If you press the Enter(
) button after moving the cursor to the video display area on the right, the motion area can be set/cancelled.
(
): Sets the whole part as the motion area.
(
): Cancels the whole motion area.
If you press “Default”, the motion setup is reset to the initial values.
Video Loss Detection Setup
Video Loss Detection Setup
Duration |
| |
None | 10 SEC |
|
None | 10 SEC |
|
None | 10 SEC |
|
None | 10 SEC |
|
| OK | Cancel |
Move/Control | Select | Exit |
If a video loss occurs from each channel, it can be set to generate an alarm output sound.
Alarm Out
Sets an
Currently, this system supports 2 Alarm Out functions and 1
The following screen appears when you press the Enter(
) button after moving the cursor to the Alarm Out item.
1 2
Beep All
OK Cancel
Duration
Sets the duration for Alarm Out. The alarm sound is sustained for the preset period.
CONTINUE: The alarm output sound is maintained until it is cancelled by pressing the ALARM button manually on the front panel.
10~300 Seconds: Sets the duration for alarm output.
05 menu setup
menu setup _33