: Record Lock Icon
It indicates that the record lock is activated.
This icon appears when you are recording video images while the record lock is set. To cancel the recording, enter
the preset password.
Live screen modes
After taking 4 live video inputs, images are displayed in the following 3 modes.
: PTZ Icon
The channel that the PTZ function has been set shows the PTZ icon. It is changed to yellow when the PTZ function is now active.
: Audio Icon
This icon indicates the Audio On/Off state and if it is turned on, the icon is changed to yellow.
This icon does not appear when the Video or Audio is disabled.
CAM_01 CAM_02
CAM_03 CAM_04
< 4 Split >
CAM_01 CAM_02 |
| |
< PIP > | 04 | |
live | ||
|
: Alarm In Icon
It appears when an event from the Alarm In is detected.
: Motion Icon
It appears when a motion event occurs.
: Zoom Icon
The Zoom icon appears when Zoom In is active and disappears when inactive.
: Freeze Icon
It appears when the Freeze function is active and disappears when it is cancelled.
:Insufficient HDD Space Icon
It appears when the HDD writing space is not enough.
: locked Icon
It appears when the HDD is inferior goods.
: Screen Switching Icon
It appears when it is in the screen switching mode.
V.Loss / V.Off : Video Input Status
If no video inputs are detected even when the Video Setup is set to On, the [V.Loss] icon appears on the corresponding channel; and the channel that the Video Setup is set to Off shows the [V.Off] icon.
OSD Position Control Function
Caution It is possible to control OSD position of CH1, CH3 and CH4 on live screen by Up/ Down/Left/Right buttons when in quad division mode.
<Auto Sequence >
4 Split Mode:
It shows 4 video channels on the respective split screens.
PIP (Picture in Picture):
The
The location of PIP screen can be set to any of 5 locations within the full screen by using the or button.
Auto Sequence Mode:
Multiple channels are sequentially displayed on the full screen at the preset interval.
live _17