Samsung SDM-090MP, SDM-090P When desiring to see the stop screen, Freeze setting of Full screen

Page 35

Digital Multiplexer SDM-090(P)

When desiring to see the stop screen

The monitor screen (full screen and division) may be seen with a temporary stop.

A desired screen may be temporarily stopped selectively in the division screen indication mode.

1. FREEZE setting of FULL screen

The LED turns on and monitor image stops and “FREEZE” character is indicated on the screen if pressing the “FREEZE” button in the FULL screen mode. The LED turns off and the stop mode is released if pressing the “FREEZE” button once again.

2. FREEZE setting of division screen

The LED blinks if pressing the “FREEZE” button. The selected screen stops if selecting a channel to freeze, and “F” character is displayed. The selected channel is released if pressing the relevant channel again and stop of all channels if pressing the “FREEZE” button.

	01/05/01 12:30:26	01/05/01 12:30:26
		F
		CH1	CH2
		Flash
	FREEZE
	CH1		F
	CH1	CH3	CH4
		CH3	CH4
	FULL screen	4-division screen

➢The “FREEZE” button does not operate in the following cases:

-In setting division screen mode

-In setting of program mode

-In displaying ALARM/LOSS LIST on screen

4-5

Image 35

Contents Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Triplex Name of parts and FunctionMulti Screen REC CheckEnter RESET/ERASEList MenuRear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the InstallationPrecautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other DevicesConnecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor PIN Number Remote Control by connecting to PC2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND CH4 CH5 CH6 CH7 CH8 CH9 Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetAscii CH1 CH2 CH3Chapter Initial operation Turn on power switchSetup a recording channel Change it to a desiring indication modeWhen desiring to see in the Full screen When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screenFull Mode When desiring to see in the zoom screenWhen desiring to see in the PIP screen When desiring to see output of VCR as it is When desiring to see in the record screenSetting of Program Menu Duty SET Reservation OFF Record setting of each cameraREC OUT SET REC Type TLV REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLVSetting of display mode PB Display ALL Spot OUT Cvbs PIP Size Sequence Loss Detect Loss Info Alarm InfoALL Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 SequenceTitle SET Setting of title by channelYY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display TypeREC Type NOR ↔ TL Setting of alarmAlarm SET Hold Time REC Type NOR Alarm Input OFFSystem SET Baud Rate System settingPassword Change Alarm Buzzer OFF Loss Buzzer Summer TimePassword Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record modeWeight value REC Duty record Time Lapse record modeREC Duty Alarm weight value recordReservation record Alarm, loss Digital Multiplexer SDM-090P Screen conversion Alarm occurrence conditionsAlarm release Alarm recordVCR Trig Alarm signal standardALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list referenceOperation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed

Related manuals

Manual 41 pages 18.63 Kb