Samsung SDM-090MP, SDM-090P manual Setting of display mode

Page 41

Digital Multiplexer SDM-090(P)

-The following screen is displayed if pressing the “ENTER” button where the blinking position is “ON…” at the “RESERVATION ….”.

[REC RESERVATION]

START TIME 12:30[HH:MM]

END TIME 23:59[HH:MM]

CH1 : OFF CH2 : OFF

CH3 : OFF CH4 : OFF

CH5 : OFF CH6 : OFF

CH7 : OFF CH8 : OFF

CH9 : OFF

¥Useful menu when desiring to record only specific channels at a specific time.

¥Record the channels set from the start time to the end time.

¥The blinking indication moves if pressing →“ ”, “→” button.

¥The setting value is changed if pressing “→”, “→” button.

Start time, end time HH : 00 ~ 23

Start time, end time MM : 00 ~ 59

CH1 ~ CH9 : OFF ↔ 1 ↔ 2 ↔ 3 ↔ 4 ↔ 5 ↔ OFF

¥Channels set to “OFF” does not perform when carrying out reservation record.

¥The changed setting value is stored if pressing the “SET” button. You can return to the “REC OUT SET” menu.

2. Setting of display mode

You can set LIVE/PB display type, PIP size, sequence, and border color, PB IN, etc.. The following screen is displayed if pressing the “ENTER” button with the blinking position placed at the “2. MON OUT SET” by pressing “MOVE” button on the main menu.

5-3

Image 41

Contents Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Multi Screen Name of parts and FunctionREC Check TriplexList RESET/ERASEMenu EnterRear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the InstallationPrecautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other DevicesConnecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor PIN Number Remote Control by connecting to PC2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND Ascii Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetCH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9Chapter Setup a recording channel Turn on power switchChange it to a desiring indication mode Initial operationWhen desiring to see in the Full screen When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screenFull Mode When desiring to see in the zoom screenWhen desiring to see in the PIP screen When desiring to see output of VCR as it is When desiring to see in the record screenSetting of Program Menu Duty SET Reservation OFF Record setting of each cameraREC OUT SET REC Type TLV REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLVSetting of display mode PB Display ALL Spot OUT Cvbs PIP Size Sequence Loss Detect Loss Info Alarm InfoALL Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 SequenceTitle SET Setting of title by channelYY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display TypeAlarm SET Hold Time Setting of alarmREC Type NOR Alarm Input OFF REC Type NOR ↔ TLPassword Change System settingAlarm Buzzer OFF Loss Buzzer Summer Time System SET Baud RatePassword Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record modeWeight value REC Duty record Time Lapse record modeREC Duty Alarm weight value recordReservation record Alarm, loss Digital Multiplexer SDM-090P Alarm release Alarm occurrence conditionsAlarm record Screen conversionVCR Trig Alarm signal standardALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list referenceOperation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed

Related manuals

Manual 41 pages 18.63 Kb