Samsung SDM-090MP, SDM-090P manual Alarm weight value record, Reservation record, REC Duty

Page 55

Digital Multiplexer SDM-090(P)

4.ALARM weight value record

-Record in the weight value only for the channels that alarm occurs.

-Record by inserting the channel that alarm occurs between channels.

-The duty of channels operates as “1” when recording the alarm weight value except that the REC duty is set to “OFF” (channel whose duty is “OFF” is skipped).

-Perform the alarm weight value record even when alarm occurs in the channels whose REC duty is set to “OFF”.

-Example)

REC DUTY

CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1, CH8:1, CH9:OFF ….

Alarm occurring channel: CH1, CH9

1 2 2 3 1 4 1 6 1 7 1 8 1 1 1 9 2 1 9 3

➞	➞
CH1 “A”	CH9 “A”

5.Reservation record

-Specific channel is used to record for a specific time.

-Use by setting the start and time of channel setting and reservation record in the “RESERVATION” of the “1.REC OUT SET” on the setup menu.

-The channel whose duty is set to “OFF” is not recorded.

✴Perform the alarm weight value record for the channel set to the reservation

record if the alarm occurs for the period of reservation record.

6-3

Image 55

Contents Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Triplex Name of parts and FunctionMulti Screen REC CheckEnter RESET/ERASEList MenuRear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the InstallationPrecautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other DevicesConnecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor 2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND Remote Control by connecting to PCPIN Number CH4 CH5 CH6 CH7 CH8 CH9 Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetAscii CH1 CH2 CH3Chapter Initial operation Turn on power switchSetup a recording channel Change it to a desiring indication modeWhen desiring to see in the Triplex screen When desiring to see in the live screen/replay screenWhen desiring to see in the Full screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screenWhen desiring to see in the PIP screen When desiring to see in the zoom screenFull Mode When desiring to see output of VCR as it is When desiring to see in the record screenSetting of Program Menu REC OUT SET REC Type TLV Record setting of each cameraDuty SET Reservation OFF REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLVSetting of display mode ALL Sequence Loss Detect Loss Info Alarm InfoPB Display ALL Spot OUT Cvbs PIP Size Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 SequenceTitle SET Setting of title by channelYY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display TypeREC Type NOR ↔ TL Setting of alarmAlarm SET Hold Time REC Type NOR Alarm Input OFFSystem SET Baud Rate System settingPassword Change Alarm Buzzer OFF Loss Buzzer Summer TimePassword Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record modeWeight value REC Duty record Time Lapse record modeReservation record Alarm weight value recordREC Duty Alarm, loss Digital Multiplexer SDM-090P Screen conversion Alarm occurrence conditionsAlarm release Alarm recordVCR Trig Alarm signal standardALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list referenceOperation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed

Related manuals

Manual 41 pages 18.63 Kb