Digital Multiplexer SDM-090(P)
When desiring to see in the live screen/replay screen
The “live/P.B” select button determines the live screen/replay screen mode.
The LED turns on in the live mode and it turns off in the tape replay mode.
If pressing this button, the indication mode is changed to the replay mode for the live mode and to the live mode for the replay mode.
➢The “LIVE/P.B” button does not operate in the following cases:
-During zoom operation
-In setting of program mode
-In displaying ALARM/LOSS LIST on screen
When desiring to see in the TRIPLEX screen
The “TRIPLEX” button sets the TRIPLEX screen mode. In this case the LED turns on and the previous TRIPLEX division mode is set.
➢The “TRIPLEX” button does not operate in the following cases:
-During zoom operation
-In setting of program mode
-In displaying ALARM/LOSS LIST on screen
When desiring to see in the FULL screen
The FULL screen may be seen in the live and tape replay mode, available for 9 channels from No.1 through No.9.
➢Method to use.
Press the camera select button of the desired channel.
➢The camera select button does not operate in the following cases:
-In setting of program mode
-In displaying ALARM/LOSS LIST on screen
-In setting FREEZE in the division screen
-In resetting of channel in the division screen