Digital Multiplexer SDM-090(P)
D. ALARM
-RESET/ERASE
Button for deactivating ALARM. When ALARM is input, RESET/ERASE Button should illuminate.
When “ALARM/LOSS LIST” is displayed on the screen, pressing this Button will erase page by page.
-LIST
Shows ALARM/LOSS LIST.
E. SETUP/FUNCTION
-MENU
Pressing this Button will make LED lit, and MAIN MENU appears on the screen.
-ENTER
Used when switching from MAIN MENU to SUB MENU.
-SET
This function is used when moving from SUB MENU to MAIN MENU after setting programs on each MENU screen, or is used when setting each channel for multi- screen. When setting channels for
-SEQUENCE
When pressing this Button, each Channel will automatically be switched to the next channel sequentially with some time intervals, and LED should illuminate. Pressing again will stop illuminating, and stops sequencing.
-FREEZE
When pressing this Button, selected screen becomes still, and LED should illuminate.
- ZOOM
When pressing this Button, the screen should enlarge. Pressing once enlarges twice, and another pressing enlarges 4 times, and pressing once again will bring the screen back to normal.
F. MOVE ( , | , | → | ,→ ) |
→ | → |
|
This function is used when setting Program Menu, Channel of