Digital Multiplexer SDM-090(P)
2.TIME LAPSE record mode
-When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”.
-The image signal entered from the maximum 9 cameras is recorded on the VCR in response to the trigger signal of VCR.
-The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more than 1.
-The trigger out of VCR and the VTR terminal this unit must be connected.
-“NO TRIGGER” character is displayed on screen while operating the field record operation of the normal mode if the trigger signal is not received for 10 seconds.
Trigger output from TIME LAPSE VCR
T | T T T T T T T T T T T T | T T T T T T T |
VCR TAPE 1 2 | 3 4 5 6 7 8 9 1 2 3 4 | 5 6 7 8 9 1 |
3.Weight value (REC DUTY) record
-Used to record weight value (record frequency is more than the channel whose duty is low) for the important channel.
-Perform the weight value record using the REC duty (OFF, 1~5) by channel set from the “REC DUTY” of the “1.REC OUT SET” on the main menu.
-The channel whose duty is set to “OFF” is not recorded.
-Example)
CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1, CH8:1, CH9:1...
1 2 2 3 4 4 4 6 7 8 9 1 2 2 3 4 4 4 6