Samsung SDM-090MP, SDM-090P manual Alarm S/W Time

Page 43

Digital Multiplexer SDM-090(P)

-The following is displayed if pressing the “ENTER” button with the blinking position placed at the “SPOT OUT...”:

[SPOT OUT]

CH1 : 02 CH2 : 00

CH3 : 00 CH4 : 00

CH5 : 00 CH6 : 00

CH7 : 00 CH8 : 00

CH9 : 00

ALARM S/W TIME : 02

¥You can set the sequence time of SPOT output.

¥The blinking indication moves if pressing “→”, “→” button.

¥ The setting value is changed if pressing “ → ”, “ →” button. CH1~CH9 : 0 to 30 seconds.

Alarm S/W TIME : 01 to 30 seconds.

¥The changed setting value is stored if pressing the “SET” button and you can return to the “MON OUT SET” menu.

✴The channel of LOSS or “ 0 ” of sequence time will be skipped in the SPOT output sequence.

✴SPOT OUTPUT on alarm

When the alarm is activated, only the alarmed channel will be output. On single alarm : output only the alarmed channel.

On multiple alarms : output alarmed channels in turn at intervals of set ALARM S/W TIME.

(Even the sequence time of the alarmed channel is set as “ 0 ” then will be SPOT

output.)

5-5

Image 43

Contents Digital Multiplexer Digital Multiplexer SDM 090P Do Not Expose This Equipment To Rain or Moisture Important Safeguards Digital Multiplexer SDM-090P Digital Multiplexer SDM-090P Contents Viii Occurrence and Handling of Alarm Chapter Introduction IntroductionPage Triplex Name of parts and FunctionMulti Screen REC CheckEnter RESET/ERASEList MenuRear Panel VCR IN/OUT BNC Installation Physical & Environmental Preparing for the InstallationPrecautions when Installing 15Cm Digital Multiplexer SDM-090P Unpacking Connecting to Other Devices Connecting to normal VCR and Monitor Connecting to Other DevicesConnecting to S-VHS VCR and S-VHS Monitor Connecting to Time Lapse VCR Connecting to Alarm Sensor 2TXDTRANSMITTEDDATA 3RXDRECEIVEDDATA 5SGSIGNALGROUND Remote Control by connecting to PCPIN Number CH4 CH5 CH6 CH7 CH8 CH9 Multi Screen REC CHECK/PB Through LIVE/PB Triplex PIP ResetAscii CH1 CH2 CH3Chapter Initial operation Turn on power switchSetup a recording channel Change it to a desiring indication modeWhen desiring to see in the Triplex screen When desiring to see in the live screen/replay screenWhen desiring to see in the Full screen When desiring to see in the division screen When desiring to see automatic sequential conversion screen Freeze setting of Full screen When desiring to see the stop screenWhen desiring to see in the PIP screen When desiring to see in the zoom screenFull Mode When desiring to see output of VCR as it is When desiring to see in the record screenSetting of Program Menu REC OUT SET REC Type TLV Record setting of each cameraDuty SET Reservation OFF REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Type NOR ↔ TLVSetting of display mode ALL Sequence Loss Detect Loss Info Alarm InfoPB Display ALL Spot OUT Cvbs PIP Size Alarm S/W Time CH1 02 CH2 CH3 02 CH4 CH5 02 CH6 CH7 02 CH8 CH9 SequenceTitle SET Setting of title by channelYY/MM/DD MM/DD/YY DD/MM/YY 01/04/01 123001 YY/MM/DD Hhmmss DATE/TIME SET Display TypeREC Type NOR ↔ TL Setting of alarmAlarm SET Hold Time REC Type NOR Alarm Input OFFSystem SET Baud Rate System settingPassword Change Alarm Buzzer OFF Loss Buzzer Summer TimePassword Change Password Check NEW Password Confirm +++++++++++++++++ + - - - - + Recording Digital Multiplexer SDM-090P Frame Normal record modeWeight value REC Duty record Time Lapse record modeReservation record Alarm weight value recordREC Duty Alarm, loss Digital Multiplexer SDM-090P Screen conversion Alarm occurrence conditionsAlarm release Alarm recordVCR Trig Alarm signal standardALARM/LOSS List YY/MM/DD Hhmmss Alarm/Loss list referenceOperation in video loss Appendix a Appendix a Specifications Auto Switcher Outside Drawing Appendix B Appendix B Checking points in trouble When S-VHS record is not performed

Related manuals

Manual 41 pages 18.63 Kb