descaling and cleaning
Descale mode
When you see the message on the display, the oven needs to be descaled.
If you do not perform to 2 step of descale mode (cleaning and rinse mode), the descale message does not disappear. Since then you operate the steam mode 2 more hours after the descale message is displayed, the
1.Pour 500 ml mixed solution of descaler and clean water in the water tank. Regarding to mixing ratio, refer to the user manual of descaler.
2. Close the lid of water tank before installing into main unit.
3.Turn the MODE SELECTOR to “OFF” position.
4.Close the door and press and hold down
both END TIME and SELECT. The machine displays 50 minutes and starts descaling.
• Cleaning Mode: 40 min
• Rinse Mode: 10 min
5.When it has progressed for about 40 minutes,
the machine displays “10:00” and stops operating with a beep.
Remove the tank and empty any remaining mixed water.
Wash the tank with water and fill up to the maximum line with clean water.
Put it back into the main unit.
•When ‘10:00’ is displayed, you have to operate the rinse mode within
25 minutes. If you do not, the set will be reset after 25 minutes and then you will perform the descale mode again.