Filling the water tank
You will see the water tank on the
Caution | Do not fill the water tank with distilled water or any other |
| liquids. |
Fill the water tank before Push the steam door to open it. Lift the water tank over
each use | the interlock and pull the tank out of the appliance. Open | |
| the lid and fill the water tank with cold water up to the | |
| “Max” mark. If you use the measuring jug to fill the water | |
| tank, you don’t have to pull the water tank completely out | |
| of the appliance. Close the lid until you feel it engage. | |
| Slide the water tank back until it engages. | |
|
|
|
|
|
|
Empty the water tank after Pull the water tank out of the appliance slowly. Pulling it
each useout quickly may cause water to spill. Hold the water tank horizontally, so that no remaining water can drip out of the valve seat.
Empty out the water.
Thoroughly dry the water tank in the appliance and the seal in the lid.
“Fill water tank” display If the water tank is empty, a signal sounds.
A symbol appears in the display (see the below picture). The operation is interrupted.
1.Take out the water tank, fill to the “Max” mark and reinsert.
2.Press START.