Tripp Lite SRXCOOL12K Introduction, Important Safety Instructions, Recommended Applications

Page 2

Introduction

The self-contained Portable Air Conditioning Unit provides 12,000 BTU (up to 3.4 kW) of supplemental cooling capacity. Designed for IT environments, it’s ideal for cooling overheated rack enclosures, IT equipment hot spots and network closets without access to facility air conditioning. The Portable Air Conditioning Unit can focus cool air through its flexible cooling duct or cool a small room through its louvered vent. It also filters and dehumidifies air to improve operating conditions and equipment reliability. Condensate is re-evaporated for drip-free operation, so you won’t waste time emptying water collection tanks. The self-contained design does not require any plumbing or special circuits, so setup is quick and easy. Eco-friendly R410A refrigerant meets environmental standards worldwide.

Recommended Applications:

1. Cooling an overheated rack enclosure.

2.Cooling an equipment hot spot inside or outside a rack enclosure.

3. Cooling a small room.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of this product. Failure to heed these warnings may affect your warranty.

Warnings

•The individual user should determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of this device for any specific application.

•Install the unit indoors, away from extreme temperatures or humidity, direct sunlight, dust and conductive contaminants.

•Leave adequate space around the unit for ventilation, with rear and vented sides not less than 20 inches (51 cm) from walls or other obstacles.

•Install the unit on a flat surface with a gradient no more than 10°.

•Connect the unit directly to a grounded AC power outlet. Failure to do so may cause an electric shock or fire.

•The power supply for the unit must be rated in accordance with the unit’s nameplate.

•Do not modify the plug nor use an adapter that would eliminate the ground connection.

•Do not use an extension cord to connect the unit to an AC outlet. Use only the power cord that came with the unit.

•Comply with all applicable wiring and safety regulations, such as National Electrical Code (NEC) in the United States.

•Do not plug additional equipment into the outlet where the unit is plugged in. Overloading the outlet may cause an electric shock or fire.

•Do not attempt to turn the unit on or off by connecting or disconnecting the AC plug. A serious electric shock may occur. Use the ON/OFF button to turn the unit on or off.

•Turn the unit off and unplug it from the AC outlet before performing maintenance.

•Before connecting the unit to a dedicated drainage system, turn it off and unplug it. There is a risk of electric shock while the unit is plugged in.

•Maintenance should be performed by trained personnel only.

•Do not use thinners, alcohol, detergents or abrasive brushes to clean the unit’s cabinet. These items may damage the cabinet.

•Do not pour water over the unit. This may cause an electric shock and damage the unit.

•Do not operate the unit without the air filter. This may cause dust accumulation that may damage the unit.

•Do not attempt to operate the unit in a room with inadequate air circulation. Provide makeup air in accordance with applicable building codes.

•Do not place objects on top of the unit.

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Portable Air Conditioning Unit SRCOOL12K 120 V, 60 Hz SRXCOOL12K 230V, 50 HzRecommended Applications Important Safety InstructionsIntroduction Control Panel FeaturesFront View Unit Placement InstallationAccessory Parts List Cooling Duct Connection OptionalExhaust Duct Connection After completing , proceed to step Drop Ceiling Exhaust ConnectionWindow Exhaust Connection 2Cooling Mode without Re-Evaporation Low Temperature Operation1Cooling Mode with Re-Evaporation 3Dehumidify ModeOperation Alarm MaintenanceTroubleshooting Cleaning the Air FiltersAdditional Display Error Codes Storage and ServiceWarranty and Warranty Registration ServiceManual del Propietario SRCOOL12K 120V, 60 Hz SRXCOOL12K 230V, 50 HzAplicaciones Recomendadas IntroducciónInstrucciones de seguridad importantes AdvertenciasPanel de Control CaracterísticasVista Frontal Ubicación de Unidad InstalaciónLista de Piezas Accesorias Conexión del Ducto de Enfriamiento OpcionalConexión del Ducto de Descarga Después de terminar el paso 4 , proceda al paso Conexión de Descarga de Falso PlafónConexión de Descarga de Ventana 1Modo de Enfriamiento con Re-evaporación Inserción del Tapón de DrenajeOperación a Baja Temperatura 2Modo de Enfriamiento sin Re-evaporaciónFuncionamiento Mantenimiento Solución de ProblemasAlarma Limpieza de los Filtros de AireGarantía y Registro de Garantía Códigos Adicionales de Error de PantallaAlmacenamiento y servicio AlmacenamientoManuel du propriétaire SRCOOL12K 120 V, 60 Hz SRXCOOL12K 230V, 50 HzAvertissements Applications recommandéesConsignes de sécurité importantes Vue de face Panneau de commandeCaractéristiques Connexion du conduit de refroidissement en option Liste des pièces accessoiresDisposition de l’appareil Installation suite Connexion du conduit d’évacuationConnexion de l’évacuation à un faux-plafond Après avoir complété l’étape 4 , passez à l’étape1Mode de refroidissement avec évaporation Insertion du bouchon d’évacuationFonctionnement à basse température 2Mode de refroidissement sans évaporationFonctionnement Changement des unités de température AlarmeDépannage Nettoyage des filtres à airCodes d’erreur d’affichage supplémentaires Entreposage et serviceGarantie et enregistrement de la garantie EntreposageРуководство пользователя SRCOOL12K 120 В, 60 Гц SRXCOOL12K 230 В, 50 ГцПредупреждения ВведениеВажные указания по технике безопасности Вид спереди Панель управленияРазмещение устройства УстановкаПеречень комплектующих Подсоединение воздуховода охлаждения опциональноПодсоединение вытяжного воздуховода Установка продолжениеДля всех вариантов применения Проводка вытяжного воздуховода через подвесной потолокВытяжка через окно По завершении шага 4 , переходите к шагу1Режим охлаждения с повторным испарением Установка сливной пробкиРабота при низких температурах 2Режим охлаждения без повторного испаренияЭксплуатация Выявление и устранение неисправностей Эксплуатация продолжениеТехническое обслуживание Гарантийные обязательства и регистрация гарантии Выявление и устранение неисправностей продолжениеХранение и техническое обслуживание Коды ошибок, выводимые на дисплей
Related manuals
Manual 8 pages 38.72 Kb

SRCOOL12K, SRXCOOL12K specifications

The Tripp Lite SRXCOOL12K and SRCOOL12K portable air conditioners are designed for those seeking an efficient cooling solution for small to medium-sized spaces. These units are particularly popular in server rooms, offices, and other environments where heat output can be an issue. Both models share several key features and characteristics that make them stand out in the portable cooling market.

One of the main features of the Tripp Lite SRXCOOL12K is its powerful cooling capability. With a cooling capacity of 12,000 BTU, the unit can effectively cool areas up to 400 square feet. This makes it suitable for a variety of applications, from temporary cooling in commercial settings to long-term solutions for home offices or server equipment. The unit also operates quietly, which is beneficial for environments where distractions need to be minimized.

The SRXCOOL12K and SRCOOL12K both utilize advanced technologies that enhance their performance and ease of use. The self-evaporative design allows for efficient cooling while minimizing the need for manual drainage. The units can drain moisture as water vapor, reducing the frequency of maintenance and ensuring consistent performance. This technology helps maintain compact size and mobility while keeping energy consumption in check.

Convenience is another significant characteristic of these models. The included remote control allows users to adjust settings from a distance, providing added flexibility. With multiple cooling settings and fan speeds, users can customize their cooling experience according to their specific needs or preferences. Moreover, the energy-saving mode is particularly useful for those looking to reduce electricity costs while still enjoying a comfortable environment.

The Tripp Lite SRXCOOL12K and SRCOOL12K are also designed with user-friendly installation in mind. Their compact and portable designs make them easy to move between rooms or locations, and the included window installation kit facilitates straightforward setup in various window types.

In summary, the Tripp Lite SRXCOOL12K and SRCOOL12K offer an effective solution for cooling needs with their robust cooling capacities, self-evaporative technology, and user-friendly features. Ideal for both commercial and residential applications, these portable air conditioners provide dependable performance, convenience, and energy-efficiency for any space that requires reliable cooling.
Top Page Image Contents