Installation, Accessory Parts List | Tripp Lite SRXCOOL12K guide

Installation

Warning: After removing the unit from the shipping container, check for damage or missing parts. (Refer to the parts list below.) If you notice a problem, visit www.tripplite.com/support for service. Do not attempt to operate a damaged unit.

Accessory Parts List:

Exhaust Duct	Cooling Duct	Exhaust Duct	Adjustable	Self-Tapping	2 Duct Adapters	Louvered Vent	Drainage
(Longer Tube)	(Shorter Tube)	Adapter	Exhaust Panel	Screw	(1 Pre-Installed)	Insert	Plug
			(2 Sections)			(Pre-Installed)	(2 Pre-Installed)

1Unit Placement

Place the unit on a flat, level surface near a grounded AC outlet rated in accordance with the unit nameplate (90-110% of specified voltage). Leave adequate space around the unit for ventilation, with rear and vented sides not less than 20 inches (51 cm) from walls or other obstacles. Place the unit in a location with convenient access to a drop ceiling or window to provide the straightest, shortest path available for the flexible exhaust duct. If you plan to use the flexible cooling duct to focus cool air on a specific rack enclosure or device, place the unit near the targeted rack enclosure or device to provide the straightest, shortest path available for the cooling duct.

Warning: Do not use an extension cord to connect the unit to an AC outlet. Use only the power cord that came with the unit.

Note: If the unit will operate in a confined space (such as closet), you must supply makeup air in order to maintain airflow efficiency. A 100 in.2 (645 cm2) or larger vent installed near the bottom of the door should supply adequate makeup air for a typical closet. Consult applicable building codes for more information.

Exhaust hose not shown—see Section 3.
	1

100 in.2 (645 cm2) Vent (For Confined Spaces)

> 20 in (51 cm)

>20 in (51 cm)

2Cooling Duct Connection (Optional)

The pre-installed louvered vent insert is appropriate for room cooling applications. If you plan to cool a room, skip step 2 and proceed to step 3. If you plan to use the flexible cooling duct to focus cool air on a specific device or rack enclosure, follow the instructions below.

2-1Remove the louvered vent insert A by pulling it outward and upward.

2-1

2-2Align the cooling duct adapter A in the vent opening and push it downward until it snaps

into place.	A

2-2

SRCOOL12K, SRXCOOL12K specifications

The Tripp Lite SRXCOOL12K and SRCOOL12K portable air conditioners are designed for those seeking an efficient cooling solution for small to medium-sized spaces. These units are particularly popular in server rooms, offices, and other environments where heat output can be an issue. Both models share several key features and characteristics that make them stand out in the portable cooling market.

One of the main features of the Tripp Lite SRXCOOL12K is its powerful cooling capability. With a cooling capacity of 12,000 BTU, the unit can effectively cool areas up to 400 square feet. This makes it suitable for a variety of applications, from temporary cooling in commercial settings to long-term solutions for home offices or server equipment. The unit also operates quietly, which is beneficial for environments where distractions need to be minimized.

The SRXCOOL12K and SRCOOL12K both utilize advanced technologies that enhance their performance and ease of use. The self-evaporative design allows for efficient cooling while minimizing the need for manual drainage. The units can drain moisture as water vapor, reducing the frequency of maintenance and ensuring consistent performance. This technology helps maintain compact size and mobility while keeping energy consumption in check.

Convenience is another significant characteristic of these models. The included remote control allows users to adjust settings from a distance, providing added flexibility. With multiple cooling settings and fan speeds, users can customize their cooling experience according to their specific needs or preferences. Moreover, the energy-saving mode is particularly useful for those looking to reduce electricity costs while still enjoying a comfortable environment.

The Tripp Lite SRXCOOL12K and SRCOOL12K are also designed with user-friendly installation in mind. Their compact and portable designs make them easy to move between rooms or locations, and the included window installation kit facilitates straightforward setup in various window types.

In summary, the Tripp Lite SRXCOOL12K and SRCOOL12K offer an effective solution for cooling needs with their robust cooling capacities, self-evaporative technology, and user-friendly features. Ideal for both commercial and residential applications, these portable air conditioners provide dependable performance, convenience, and energy-efficiency for any space that requires reliable cooling.