Samsung AR30HCFUAWKNMG, AR36HCFUAWKNMG manual Press the button to set the desired fan speed

Page 11

Press the button to turn on the air conditioner.

Press the button to set the operating mode.

•Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat (ARHP series).

Press the button to set the desired fan speed.

	Auto	(Auto)

	Cool	(Auto),	(Low),	(Med),	(High)

	Dry	(Auto)

	Fan	(Low),	(Med),	(High)

	Heat	(Auto),	(Low),	(Med),	(High)
	(ARHPseries)	(Auto),	(Low),	(Med),	(High)
	(ARHPseries)

Press the button to adjust the temperature.

Auto	You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Cool	You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Dry	You can adjust the desired temperature by 1°C within the range of 18°C~30°C.
Fan	Temperature adjustment is not possible.
Heat	You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
(ARHPseries)

• Air flow can be adjusted manually.(see page 12 for instructions.)

ENGLISH

11

SSEC_UMG_IB&IM_DB68-04508A_EN.indd 11

2014-2-10 14:56:43

Image 11

Contents English Contents Wall socket SafetAA y precautionsImportant safety symbols and precautions Follow directionsFor Using For Cleaning Operation ranges ChecAA king before useDisplay ChecAA king the name of the partsMain parts Remote controller buttons ChecAA king the remote controllerInserting the batteries Remote controller displayBattery changing time Storing the remote controllerBasicAA function Press the button to set the desired fan speed Press the button to adjust the temperatureVertical air flow Using the Turbo functionPress the Air swing button on the remote controller AdjusA ting the air flow directionPress the Set button to active it on AA modePress the button on the remote controller Press the Time Up or Time Down button to set the timeYou can select from Auto/Cool/Dry/Fan/Heat ARHPmodel SettinAA g the On/Off timerPress the On Timer/Off Timer button Additional options available in On timer modeTurn off automatically Using the Smart Saver functionFrom the moment you have set the timer If the air conditioner is on If the air conditioner is offWhen the air conditioner is turned on UsingAA the Auto Clean functionUsing the Quiet function Heat exchanger Cleaning the indoor unitCleaning the outdoor unit heat exchanger Opening the panelOpen the panel and put the Air filter out CleanAA ing the air conditionerCleaning the air filter Removing the Air filterPeriodical checks MaintAA aining the air conditionerTroubAA leshooting Connection Flow movement changes. It is normalGeneral information Safety precautions a place where the air filter can be replaced easily Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerOutdoor Unit ChooAA sing the installation locationWhere sulfide gas exists Top view Side view When installing more than 1 outdoor unitWhen the air outlet is towards the wall  Figure DescriptionAccessories in the outdoor unit case AccessoriesAccessories in the indoor unit case Tools for test operations Fixing the installation plateOptional accessories Tools required for installation General ToolsConnecting the cable Connecting the assembly cableCable specification Installation Extend the assembly cable if necessaryEach wire is labeled with the corresponding terminal number Cut off the remaining foam insulation Smooth the cut edgesPut a flare nut slightly into the pipe and modify the flare AAPurging the indoor unitCutting or extending the pipe Unscrew the caps at the end of each pipeOuter Diameter CuttingAA or extending the pipeCheck for leakage on both side of the drain outlet Drain hose installationTwo hoses are firmly connected, there is no water leakage Hose tightARHPseries Purging the connected pipesIf you use a pipe shorter than 4 m Adding RefrigerantAdd refrigerant charge according to table below 30g of refrigerant R-22 must be added for each extra meterFixing the indoor unit in place PerfoAA rming the gas leak testsAppropriate support wall or ground Outdoor unit installed on the wall by rackFixing the outdoor unit in place Check the followings Press the Power button and check the followingPress the Power button to stop the operation FinalAA Check and Trial OperationInsulation tape to finish Apply heat to the contraction tube to contract itAfter tube contraction work is completed, wrap it with AR30HCFUAWK/MG AR36HCFUAWK/MG TechnAA ical SpecificationsEnglish Egypt Questions or COMMENTS?Air Conditioner

Related manuals

Manual 43 pages 5.33 Kb