Samsung AF55JV1MAAPNMG, AF55MV1MAEENMG, AF55JS1MAEENMG, AF55JS3MAAPNMG Basic operation, ENGLISH-20

Page 20

Basic operation

Basic operation is an operation mode that can be selected by pressing the Mode button.

Auto

In Auto mode, the air conditioner will automatically set the Operation(Cool/Heat Mode) and fan speed depending on the room temperature detected by the room temperature sensor. (Heat mode is applicable to AF55JSMAmodel only.)

Cool

Cool mode is frequently used and you can freely control the temperature, fan speed, and air flow direction in cool mode.

Dry

The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air. The Dry mode will provide you with fresh air even on a rainy day.

ffOutdoor unit will repeatedly and automatically turn on/off for maximum dehumidification according to the temperature difference of the current and desired temperature.

Fan

Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.

fIfyou are not going to use the air conditioner for a while, we recommend to operate the Fan mode for 3~4 hours to dry the internal part of the air conditioner..

Heat (Applicable model: AF55JSMA)

In Heat mode, the indoor temperature, fan speed, and air flow direction can be adjusted at your desire to warm your indoor.

ffIndoor unit may not start the operation immediately until indoor heat exchanger is warmed up to a certain temperature (approximately 5 minutes according to current indoor temperature) to prevent generating a cold breeze.

ffDefrost display: When removing frost at the outdoor unit in the Heat mode, (Defrost) icon will be displayed on the indoor unit display and it will be turned off after removing the frost.

(When removing the frost during the defrost operation in Heat mode, steam may be generated and the warm breeze may not come out from the indoor unit.)

• When the outdoor temperature is low and humidity is high, frost may form on outdoor unit's heat exchanger

NOTE

and may decrease the heating performance so the Defrost operation will operate for 5 ~ 12 minutes to get rid of

the frost on the outdoor unit heat exchanger. Indoor unit will be off during Defrost operation is on since cold air

 

 

may come out from it.

 

-- Intervals between Defrost operation cycle may vary depending on the amount of frost on the outdoor unit.

 

-- In snowy or rainy days, Defrost operation cycle may be shorter due to humidity.

 

-- You cannot control the air conditioner with the remote controller while Defrost operation is on. Try to control

 

the air conditioner after Defrost operation is complete.

ENGLISH-20

PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 20

2016-08-08 오전 11:38:22

Image 20
Contents Air Conditioner Thank you for purchasing this Samsung productFeatures of your new air conditioner Powerful speed/Convenient remote operationEnergy saving technology with S-inverter system Auto air flow bladesContents Safety precautions ENGLISH-4ENGLISH-5 P01reparationFor Installation ENGLISH-6For Power Supply Warning ENGLISH-7ENGLISH-8 ENGLISH-9 ENGLISH-10 FfThis may result in property damage ENGLISH-11Do not clean the inside of the air conditioner by yourself ENGLISH-12Checking before use ENGLISH-13Checking auxiliary power switch Operational temperature and humidity rangeAuxiliary power switchELCB, ELB Mode Indoor temperature Outdoor temperature Indoor humidityChecking the name of the parts Main partsENGLISH-15 To open the panelControl panel and the display ENGLISH-16ENGLISH-17 Checking the remote controllerRemote controller buttons Remote controller display ENGLISH-18Using the remote controller Battery changing timeStoring the remote controller Inserting the batteriesBasic operation ENGLISH-20Turning on the power Selecting the operation modeAdjusting the desired temperature Selecting the fan speedSelecting air flow direction ENGLISH-22Setting the On/Off timer When the air conditioner is offAdditional options available in On timer ENGLISH-23When the air conditioner is on ENGLISH-24ENGLISH-25 Using the Turbo functionWhen the air conditioner is operating in Cool or Heat mode Using the Long function ENGLISH-26O04 thers Locking the control panelENGLISH-27 Using the air conditioner with the control panel Button to adjust vertical air flow directionENGLISH-28 Button againCleaning the indoor unit Cleaning the outdoor unit heat exchangerENGLISH-29 O05 thersCleaning the Air filter ENGLISH-30Maintaining your air conditioner Periodical checksENGLISH-31 Dust, etcMay have deposited at low temperatures Internal protections via the unit control systemENGLISH-32 Type DescriptionTroubleshooting ENGLISH-33Come out of the air Turned on Conditioner ENGLISH-34Generate any odor ENGLISH-35Noise is generated ENGLISH-36Accessing its internal components General informationENGLISH-37 I06nstallationInstalling the unit Power supply line, fuse or circuit breakerDo not install the air conditioner in following places ENGLISH-38Part Name Accessory parts listENGLISH-39 Selection of installation place Indoor unitSide view Outdoor unitSingle installation When the air outlet is opposite the wallWhen 3 sides of the outdoor unit are blocked by the wall ENGLISH-41When installing more than 1 outdoor unit ENGLISH-42Outdoor unit base mount and anchor bolt position ENGLISH-43ENGLISH-44 Preparing the installationSelecting appropriate location for installation Drilling a hole in a wall Space requirementsENGLISH-45 Wear protective goggles and mask before sprayingInstalling the air conditioner Refrigerant pipe work Insulating the pipesOil trap ENGLISH-46Refrigerant piping work Electrical workENGLISH-47 Removing the connection pipePower specification ENGLISH-48Or capacity requirements Connecting the power terminalENGLISH-49 AF55J1MA Series / Ackpcc Series Connecting the wiresENGLISH-50 FfEntire system diagram FfPower wiring diagramOrder of electrical connection ENGLISH-51FfEntire system diagram Power supply cable FfIndoor and outdoor unit connection diagramENGLISH-52 AF55J3MA SeriesHow to connect your extended power cables ENGLISH-53Prepare the following tools Contraction tubeApply heat to the contraction tube to contract it ENGLISH-54FfMethod Checking the earthing ENGLISH-55ENGLISH-56 Nm = 10 kgfcm Charging the refrigerant and preventing refrigerant leakageENGLISH-57 ENGLISH-58 Pressure table for temperaturesIndoor temperature C Dry bulb / Wet bulb ENGLISH-59 FfFix the pipe with a clamp and screwsFix them with a cable tie or tape Connecting drain hose of indoor and outdoor unitENGLISH-60 Things to check after completing the installation ENGLISH-61Testing operations Ff3 phases power supply R, S, T, NENGLISH-62 Check the indoor unitShort Display contents ENGLISH-63Unit PushDIP switch option FfDIP switchSW507 optionFor 4 indoor unit connection FfDIP switchSW508 option ENGLISH-64ENGLISH-65 Meaning RemarksENGLISH-66 After pipe extensionPacking and unpacking guide ENGLISH-67ENGLISH-68 Product specification ENGLISH-69ENGLISH-70 ENGLISH-71 Design PressureQuestions or COMMENTS?
Related manuals
Manual 72 pages 59.62 Kb

AF55JV1MAEENMG, AF55JV1MAAPNMG, AF55JV3MAEENMG, AF55JS1MAEENMG, AF55JS1MAAPNMG specifications

The Samsung AF55JS3MAAPNMG, AF55MV1MAEENMG, AF55JV1MAEEXMG, AF55JV3MAAPNMG, and AF55JS3MAEENMG series of displays represent the pinnacle of modern digital signage technology. These models are designed for a variety of commercial applications, ranging from retail environments to corporate settings, providing a comprehensive solution for any visual communication need.

One of the standout features of these displays is their impressive picture quality. Equipped with Samsung's advanced LED technology, these monitors deliver vibrant colors, deep blacks, and excellent contrast ratios. This ensures that content is not only visually appealing but also easy to read, making it ideal for advertising and information dissemination.

The AF series incorporates Smart Hub technology, which allows for seamless access to various applications and content management systems. This feature streamlines the process of displaying digital signage content, enabling users to easily update and manage their information from a centralized location. The integration of this technology enhances the overall user experience and simplifies operations within retail and corporate environments.

These displays also boast a wide viewing angle, which ensures that content is visible from multiple perspectives. This is particularly advantageous in high-traffic areas where customers or employees may be viewing the screen from different locations. The result is enhanced engagement and improved communication, which are essential for effective digital signage.

In terms of durability, the AF55 series is built to withstand the rigors of continuous operation. The models are designed for 24/7 usage, making them ideal for environments that require round-the-clock operation. Their robust construction ensures reliability and longevity, providing businesses with a sound investment over time.

Additionally, energy efficiency is a key characteristic of the Samsung AF55 displays. These models are designed to consume less power without compromising on performance, contributing to lower operational costs and a reduced environmental impact.

Moreover, the flexibility in installation is another notable feature. These displays can be mounted in various orientations, including landscape and portrait modes, allowing businesses to customize their setup based on the space available and the nature of the content being displayed.

In summary, the Samsung AF55 series models are equipped with advanced technologies, superior picture quality, and solid durability. Their flexible application, energy efficiency, and user-friendly management features make them a top choice for businesses looking to leverage digital signage effectively.