4.Using a crimping tool, compress the two points and flip it over and compress another two points in the same location.
Compression | ffMethod 1 | ffMethod 2 |
dimension | Compress it 4 times. | Compress it 4 times. |
5 mm
5 mm
5.Wrap it with the insulation tape twice or more and position your contraction tube in the middle of the insulation tape. Three or more layers of insulation are required.
| ffMethod 1 | ffMethod 2 |
|
| Insulation tape | Insulation tape |
|
| 40 mm | 35 mm |
|
|
|
| |
6. | Apply heat to the contraction tube to contract it. | Contraction tube | |
|
|
| |
7. | After tube contraction work is completed, wrap it with the insulation tape to | Insulation tape | |
| finish. |
| |
|
|
| |
• Make sure that the connection parts are not exposed to outside.
CAUTION • Be sure to use insulation tape and a contraction tube made of approved reinforced insulating materials that have the same level of withstand voltage with the power cable. (Comply with the local regulations on extensions.)
• In case of extending the electric wire, please DO NOT use a
ENGLISH-54
PAC MIRAGE