![](/images/new-backgrounds/1176731/176731117x1.webp)
Fixing and insulating the connection part of the pipe
ffCheck the leakage on the connection part of pipes and make sure the insulated them afterwards. Pipe must be insulated properly so that condensation does not form.
ffUse foamed polyethylene with thickness over 5 mm to insulate the connection part of pipe.
High pressure pipe
Low pressure pipe
I06nstallation
ffWhen you insulate the pipe connection part, make sure that overlapping part of the insulator is over 30 mm.
ffFix the pipe with a clamp and screws.
Pipe insulation
30 | mm | |
| ||
over | or |
Insulator for pipe connection part
• Cut the middle part of the pipe outlet protection rubber before
WARNING | connecting the pipe. | |
Pipe outlet | ||
| ||
| protection | |
| rubber |
ENGLISH-59
PAC MIRAGE