Samsung AF55JS3MAEENMG, AF55JV1MAAPNMG, AF55MV1MAEENMG manual Preparing the installation, ENGLISH-44

Page 44

Preparing the installation

Selecting appropriate location for installation

Decide the installation location based on the following condition and obtain the user’s approval.

ffAvoid a place that may disturb your neighbor. Noise may occur from the outdoor unit and the discharged air may run into the neighborhood. (Be careful of the operation time in a residential area)

ffInstall the outdoor unit on a hard and even area that can support its weight. ffChoose a flat place that rainwater does not settle or leak.

ffChoose a place avoiding strong winds.

ffMaintain sufficient space for repairs and service.

ffChoose a place where you can easily connect the pipes and cables to the indoor unit.

ffMake sure that the condensed water dripping from the drain hose runs out properly and safely.

ffWhen installing the outdoor unit near seashore, make sure it is not directly exposed to sea breeze. If you can not find a adequate place without direct see breeze, protection wall should be constructed.

ffInstall the outdoor unit in a place (such as near buildings etc.) where it can be prevented from sea breeze which can damage the outdoor unit.

 

Outdoor unit

 

 

Outdoor unit

 

Sea breeze

 

 

Sea breeze

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sea

 

 

 

 

 

Sea

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

fIfyou cannot avoid installing the outdoor unit by the seashore, construct a protection wall around to block the sea breeze.

Protection wall

Sea breeze

Sea

Outdoor unit

• Protection wall should be constructed with a solid material such as concrete to block the sea breeze and the height and the width of the wall should be 1.5 times larger than the size of the outdoor unit. Also, secure over 700 mm between the protection wall and the outdoor unit for exhausted air to ventilate.

ffInstall the outdoor unit in a place where water can drain smoothly.

❋❋If you cannot find a place satisfying above conditions, please contact manufacturer. Make sure to clean the sea water and the dust on the outdoor unit heat exchanger and spread corrosion inhibitor on heat exchanger. (At least one time per one year.)

ffChoose a place where there is no direct sunlight.

ffChoose a place where it could not come into contact with snow and rain. ffChoose a place where flammable gas does not leak.

ffChoose a place where the indoor and outdoor unit can be connected with a pipe.

ENGLISH-44

PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 44

2016-08-08 오전 11:38:32

Image 44
Contents Air Conditioner Thank you for purchasing this Samsung productFeatures of your new air conditioner Powerful speed/Convenient remote operationEnergy saving technology with S-inverter system Auto air flow bladesContents Safety precautions ENGLISH-4ENGLISH-5 P01reparationFor Installation ENGLISH-6For Power Supply Warning ENGLISH-7ENGLISH-8 ENGLISH-9 ENGLISH-10 FfThis may result in property damage ENGLISH-11Do not clean the inside of the air conditioner by yourself ENGLISH-12Checking before use ENGLISH-13Checking auxiliary power switch Operational temperature and humidity rangeAuxiliary power switchELCB, ELB Mode Indoor temperature Outdoor temperature Indoor humidityChecking the name of the parts Main partsENGLISH-15 To open the panelControl panel and the display ENGLISH-16ENGLISH-17 Checking the remote controllerRemote controller buttons Remote controller display ENGLISH-18Using the remote controller Battery changing timeStoring the remote controller Inserting the batteriesBasic operation ENGLISH-20Turning on the power Selecting the operation modeAdjusting the desired temperature Selecting the fan speedSelecting air flow direction ENGLISH-22Setting the On/Off timer When the air conditioner is offAdditional options available in On timer ENGLISH-23When the air conditioner is on ENGLISH-24ENGLISH-25 Using the Turbo functionWhen the air conditioner is operating in Cool or Heat mode Using the Long function ENGLISH-26O04 thers Locking the control panelENGLISH-27 Using the air conditioner with the control panel Button to adjust vertical air flow directionENGLISH-28 Button againCleaning the indoor unit Cleaning the outdoor unit heat exchangerENGLISH-29 O05 thersCleaning the Air filter ENGLISH-30Maintaining your air conditioner Periodical checksENGLISH-31 Dust, etcMay have deposited at low temperatures Internal protections via the unit control systemENGLISH-32 Type DescriptionTroubleshooting ENGLISH-33Come out of the air Turned on Conditioner ENGLISH-34Generate any odor ENGLISH-35Noise is generated ENGLISH-36Accessing its internal components General informationENGLISH-37 I06nstallationInstalling the unit Power supply line, fuse or circuit breakerDo not install the air conditioner in following places ENGLISH-38Part Name Accessory parts listENGLISH-39 Selection of installation place Indoor unitSide view Outdoor unitSingle installation When the air outlet is opposite the wallWhen 3 sides of the outdoor unit are blocked by the wall ENGLISH-41When installing more than 1 outdoor unit ENGLISH-42Outdoor unit base mount and anchor bolt position ENGLISH-43ENGLISH-44 Preparing the installationSelecting appropriate location for installation Drilling a hole in a wall Space requirementsENGLISH-45 Wear protective goggles and mask before sprayingInstalling the air conditioner Refrigerant pipe work Insulating the pipesOil trap ENGLISH-46Refrigerant piping work Electrical workENGLISH-47 Removing the connection pipePower specification ENGLISH-48Or capacity requirements Connecting the power terminalENGLISH-49 AF55J1MA Series / Ackpcc Series Connecting the wiresENGLISH-50 FfEntire system diagram FfPower wiring diagramOrder of electrical connection ENGLISH-51FfEntire system diagram Power supply cable FfIndoor and outdoor unit connection diagramENGLISH-52 AF55J3MA SeriesHow to connect your extended power cables ENGLISH-53Prepare the following tools Contraction tubeApply heat to the contraction tube to contract it ENGLISH-54FfMethod Checking the earthing ENGLISH-55ENGLISH-56 Nm = 10 kgfcm Charging the refrigerant and preventing refrigerant leakageENGLISH-57 ENGLISH-58 Pressure table for temperaturesIndoor temperature C Dry bulb / Wet bulb ENGLISH-59 FfFix the pipe with a clamp and screwsFix them with a cable tie or tape Connecting drain hose of indoor and outdoor unitENGLISH-60 Things to check after completing the installation ENGLISH-61Testing operations Ff3 phases power supply R, S, T, NENGLISH-62 Check the indoor unitShort Display contents ENGLISH-63Unit PushDIP switch option FfDIP switchSW507 optionFor 4 indoor unit connection FfDIP switchSW508 option ENGLISH-64ENGLISH-65 Meaning RemarksENGLISH-66 After pipe extensionPacking and unpacking guide ENGLISH-67ENGLISH-68 Product specification ENGLISH-69ENGLISH-70 ENGLISH-71 Design PressureQuestions or COMMENTS?
Related manuals
Manual 72 pages 59.62 Kb

AF55JV1MAEENMG, AF55JV1MAAPNMG, AF55JV3MAEENMG, AF55JS1MAEENMG, AF55JS1MAAPNMG specifications

The Samsung AF55JS3MAAPNMG, AF55MV1MAEENMG, AF55JV1MAEEXMG, AF55JV3MAAPNMG, and AF55JS3MAEENMG series of displays represent the pinnacle of modern digital signage technology. These models are designed for a variety of commercial applications, ranging from retail environments to corporate settings, providing a comprehensive solution for any visual communication need.

One of the standout features of these displays is their impressive picture quality. Equipped with Samsung's advanced LED technology, these monitors deliver vibrant colors, deep blacks, and excellent contrast ratios. This ensures that content is not only visually appealing but also easy to read, making it ideal for advertising and information dissemination.

The AF series incorporates Smart Hub technology, which allows for seamless access to various applications and content management systems. This feature streamlines the process of displaying digital signage content, enabling users to easily update and manage their information from a centralized location. The integration of this technology enhances the overall user experience and simplifies operations within retail and corporate environments.

These displays also boast a wide viewing angle, which ensures that content is visible from multiple perspectives. This is particularly advantageous in high-traffic areas where customers or employees may be viewing the screen from different locations. The result is enhanced engagement and improved communication, which are essential for effective digital signage.

In terms of durability, the AF55 series is built to withstand the rigors of continuous operation. The models are designed for 24/7 usage, making them ideal for environments that require round-the-clock operation. Their robust construction ensures reliability and longevity, providing businesses with a sound investment over time.

Additionally, energy efficiency is a key characteristic of the Samsung AF55 displays. These models are designed to consume less power without compromising on performance, contributing to lower operational costs and a reduced environmental impact.

Moreover, the flexibility in installation is another notable feature. These displays can be mounted in various orientations, including landscape and portrait modes, allowing businesses to customize their setup based on the space available and the nature of the content being displayed.

In summary, the Samsung AF55 series models are equipped with advanced technologies, superior picture quality, and solid durability. Their flexible application, energy efficiency, and user-friendly management features make them a top choice for businesses looking to leverage digital signage effectively.