Samsung AF55JV1MAEENMG Refrigerant piping work, Electrical work, ENGLISH-47, Explosion and injury

Page 47

Installing the air conditioner

Refrigerant piping work

1.Cut the pipe with a pipe cutter ensuring that the cut edge remains flat and then remove all the burrs.

2.Make sure that the flared pipe doesn’t have uneven thickness, damaged and cracked surfaces, or any other defects.

3.You must use torque wrench when connecting pipes or flare nut.

Pipe

 

 

 

 

 

 

Reamer

Flare bar

I06nstallation

Outer Diameter [D, mm]

Fastening torque [N·m]

Depth [A, (mm)]

6.35

14~18

1.3

9.52

34~42

1.8

12.70

49~61

2.0

15.88

68~82

2.2

19.05

100~120

2.2

 

 

 

• When installing, make sure there is no leakage. When collecting the refrigerant, stop the compressor first before

WARNING

removing the connection pipe.

If the refrigerant pipe is not properly connected and the compressor works with the service valve open, the

 

 

pipe inhales the air and it makes the pressure inside of the refrigerant cycle abnormally high which may lead to

 

explosion and injury.

Electrical work

Wiring work must be done by the certified expert.

ffWiring work should be performed in accordance with related laws such as technical specification on electric installation or installation guide.

ffYou must install exclusive power supply.

-- If you use multi-outlet, there is a risk of electric shock or fire.

-- After initial installation, customer is responsible for re-installation fee. ffPlease install a circuit breaker. (Rated current sensitivity over 30 mA)

-- After initial installation, customer is responsible for re-installation fee.

ffTightening torque of the screws on the terminal block should be within the rated range and make sure that they don’t get loosened.

ffPlease connect ground wire.

❋❋Please install the power wire with it length shorter than 50 m. If the length of the power wire exceeds 50 m inevitably, product may not work or wire could get damaged. Therefore please contact the system expert.

ENGLISH-47

PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 47

2016-08-08 오전 11:38:33

Image 47
Contents Thank you for purchasing this Samsung product Air ConditionerAuto air flow blades Features of your new air conditionerPowerful speed/Convenient remote operation Energy saving technology with S-inverter systemContents ENGLISH-4 Safety precautionsP01reparation ENGLISH-5ENGLISH-6 For InstallationENGLISH-7 For Power Supply WarningENGLISH-8 ENGLISH-9 ENGLISH-10 ENGLISH-11 FfThis may result in property damageENGLISH-12 Do not clean the inside of the air conditioner by yourselfENGLISH-13 Checking before useMode Indoor temperature Outdoor temperature Indoor humidity Checking auxiliary power switchOperational temperature and humidity range Auxiliary power switchELCB, ELBTo open the panel Checking the name of the partsMain parts ENGLISH-15ENGLISH-16 Control panel and the displayENGLISH-17 Checking the remote controllerRemote controller buttons ENGLISH-18 Remote controller displayInserting the batteries Using the remote controllerBattery changing time Storing the remote controllerENGLISH-20 Basic operationSelecting the fan speed Turning on the powerSelecting the operation mode Adjusting the desired temperatureENGLISH-22 Selecting air flow directionENGLISH-23 Setting the On/Off timerWhen the air conditioner is off Additional options available in On timerENGLISH-24 When the air conditioner is onENGLISH-25 Using the Turbo functionWhen the air conditioner is operating in Cool or Heat mode ENGLISH-26 Using the Long functionO04 thers Locking the control panelENGLISH-27 Button again Using the air conditioner with the control panelButton to adjust vertical air flow direction ENGLISH-28O05 thers Cleaning the indoor unitCleaning the outdoor unit heat exchanger ENGLISH-29ENGLISH-30 Cleaning the Air filterDust, etc Maintaining your air conditionerPeriodical checks ENGLISH-31Type Description May have deposited at low temperaturesInternal protections via the unit control system ENGLISH-32ENGLISH-33 TroubleshootingENGLISH-34 Come out of the air Turned on ConditionerENGLISH-35 Generate any odorENGLISH-36 Noise is generatedI06nstallation Accessing its internal componentsGeneral information ENGLISH-37ENGLISH-38 Installing the unitPower supply line, fuse or circuit breaker Do not install the air conditioner in following placesPart Name Accessory parts listENGLISH-39 Outdoor unit Selection of installation placeIndoor unit Side viewENGLISH-41 Single installationWhen the air outlet is opposite the wall When 3 sides of the outdoor unit are blocked by the wallENGLISH-42 When installing more than 1 outdoor unitENGLISH-43 Outdoor unit base mount and anchor bolt positionENGLISH-44 Preparing the installationSelecting appropriate location for installation Wear protective goggles and mask before spraying Drilling a hole in a wallSpace requirements ENGLISH-45ENGLISH-46 Installing the air conditionerRefrigerant pipe work Insulating the pipes Oil trapRemoving the connection pipe Refrigerant piping workElectrical work ENGLISH-47ENGLISH-48 Power specificationOr capacity requirements Connecting the power terminalENGLISH-49 AF55J1MA Series / Ackpcc Series Connecting the wiresENGLISH-50 ENGLISH-51 FfEntire system diagramFfPower wiring diagram Order of electrical connectionAF55J3MA Series FfEntire system diagram Power supply cableFfIndoor and outdoor unit connection diagram ENGLISH-52Contraction tube How to connect your extended power cablesENGLISH-53 Prepare the following toolsApply heat to the contraction tube to contract it ENGLISH-54FfMethod ENGLISH-55 Checking the earthingENGLISH-56 Nm = 10 kgfcm Charging the refrigerant and preventing refrigerant leakageENGLISH-57 ENGLISH-58 Pressure table for temperaturesIndoor temperature C Dry bulb / Wet bulb FfFix the pipe with a clamp and screws ENGLISH-59Fix them with a cable tie or tape Connecting drain hose of indoor and outdoor unitENGLISH-60 ENGLISH-61 Things to check after completing the installationCheck the indoor unit Testing operationsFf3 phases power supply R, S, T, N ENGLISH-62Push Short Display contentsENGLISH-63 UnitENGLISH-64 DIP switch optionFfDIP switchSW507 option For 4 indoor unit connection FfDIP switchSW508 optionMeaning Remarks ENGLISH-65After pipe extension ENGLISH-66ENGLISH-67 Packing and unpacking guideENGLISH-68 ENGLISH-69 Product specificationENGLISH-70 Design Pressure ENGLISH-71Questions or COMMENTS?
Related manuals
Manual 72 pages 59.62 Kb

AF55JV1MAEENMG, AF55JV1MAAPNMG, AF55JV3MAEENMG, AF55JS1MAEENMG, AF55JS1MAAPNMG specifications

The Samsung AF55JS3MAAPNMG, AF55MV1MAEENMG, AF55JV1MAEEXMG, AF55JV3MAAPNMG, and AF55JS3MAEENMG series of displays represent the pinnacle of modern digital signage technology. These models are designed for a variety of commercial applications, ranging from retail environments to corporate settings, providing a comprehensive solution for any visual communication need.

One of the standout features of these displays is their impressive picture quality. Equipped with Samsung's advanced LED technology, these monitors deliver vibrant colors, deep blacks, and excellent contrast ratios. This ensures that content is not only visually appealing but also easy to read, making it ideal for advertising and information dissemination.

The AF series incorporates Smart Hub technology, which allows for seamless access to various applications and content management systems. This feature streamlines the process of displaying digital signage content, enabling users to easily update and manage their information from a centralized location. The integration of this technology enhances the overall user experience and simplifies operations within retail and corporate environments.

These displays also boast a wide viewing angle, which ensures that content is visible from multiple perspectives. This is particularly advantageous in high-traffic areas where customers or employees may be viewing the screen from different locations. The result is enhanced engagement and improved communication, which are essential for effective digital signage.

In terms of durability, the AF55 series is built to withstand the rigors of continuous operation. The models are designed for 24/7 usage, making them ideal for environments that require round-the-clock operation. Their robust construction ensures reliability and longevity, providing businesses with a sound investment over time.

Additionally, energy efficiency is a key characteristic of the Samsung AF55 displays. These models are designed to consume less power without compromising on performance, contributing to lower operational costs and a reduced environmental impact.

Moreover, the flexibility in installation is another notable feature. These displays can be mounted in various orientations, including landscape and portrait modes, allowing businesses to customize their setup based on the space available and the nature of the content being displayed.

In summary, the Samsung AF55 series models are equipped with advanced technologies, superior picture quality, and solid durability. Their flexible application, energy efficiency, and user-friendly management features make them a top choice for businesses looking to leverage digital signage effectively.